درباره ما
NACE - NACE International
Browse by
Recent Submissions
-
Corrosion Inhibiting Admixtures for Reinforced Concrete—A State of the Art Report - Item No. 21428
Abstract: Introduction Steel in concrete is normally protected from corrosion by the high pH of the concrete environment, which creates a stable passivation layer of iron oxides and hydroxides on the steel surface. Chlorides, ... -
State of the Art Report on Corrosion-Resistant Reinforcement - Item No. 21429/21429-SG
Abstract: This NACE report contains information about materials that provide a corrosion-resistant alternative to plain carbon steel reinforcing bar (rebar), known also as black bar. Throughout this report the term “carbon steel ... -
Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment - Item No. 21054
Abstract: This standard provides technical and quality assurance guidelines for handling and installing nickel alloy, stainless steel, and titanium linings in air pollution control equipment such as FGD systems, ducts, and stacks. 1.2 ... -
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CIRCULAR 2 - Third Edition
Abstract: The establishment of the ISO 15156 Maintenance Agency was confirmed by the ISO Technical Management Board in June 2007. A copy of the TMB Vote-Form Number: 34/2007 giving the rules of procedure for the maintenance agency ... -
Petroleum and natural gas industries - Materials for use in H2Scontaining environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons TECHNICAL CIRCULAR 2 - Third Edition
Abstract: The establishment of the ISO 15156 Maintenance Agency was confirmed by the ISO Technical Management Board in June 2007. A copy of the TMB Vote-Form Number: 34/2007 giving the rules of procedure for the maintenance agency ... -
Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers - Item No. 21230
Abstract: General The two test methods described in this standard are static laboratory screening tests designed to measure the ability of chemicals to remove gypsum scale deposits. The first method is a single-stage dissolver ... -
Format, Content, and Other Guidelines for Developing a Materials Selection Diagram - Item No. 21123
Abstract: An MSD summarizes material requirements for process equipment and piping in the refining, chemical processing, power, and other industries, and provides information needed for the development of piping and instrumentation ... -
Wet Gas Internal Corrosion Direct Assessment Methodology for Pipelines - Item No. 21146
Abstract: This standard practice formalizes a methodology to assess internal corrosion for onshore and offshore pipelines and other piping systems that normally carry natural gas with condensed water, or with water and liquid ... -
Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During a Shutdown of Refinery Equipment - Item No. 21002
Abstract: This standard practice provides mitigation methods to protect austenitic stainless steels and other austenitic alloys from PTA SCC that can occur during a shutdown of refinery equipment. For the purposes of this standard, ... -
Effectiveness of Cathodic Protection on Thermally Insulated Underground Metallic Structures - Item No. 24156
Abstract: The present trend in establishing an effective level of external metallic surface corrosion control is the application of a barrier coating or adhesive on the metallic surface prior to the application of a thermal insulating ... -
Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks - Item No. 21040
Abstract: This standard presents recommended practices for applying ICCP to the internal submerged surfaces of steel tanks used for the storage of potable and reclaimed water, drinking water, irrigation water and fire protection ... -
Test to Determine the Potential Corrosion Effects of Ballast Water Treatment Systems on Ballast Tanks Coating and Other Materials - Item No. 21258
Abstract: General While there are a number of systems used as Ballast Water Treatment, this specification focuses on the use of active chemical systems. This standard test method is designed to test the effect of long-term exposure ... -
Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems - Item No. 21231
Abstract: This standard describes and illustrates testing procedures for measuring potentials that are used to determine whether a CP criterion is achieved at a test site on underground or submerged metallic piping systems. The ... -
Control of Internal Corrosion in Steel Pipelines and Piping Systems - Item No. 21111
Abstract: This standard presents recommended practices for the control of internal corrosion in steel pipelines and piping systems used to gather, transport, or distribute crude oil, petroleum products, or natural gas. This standard ... -
Evaluation of Coatings Containing Conductive Carbon Additives for Use as an Anode on Atmospherically Exposed Reinforced Concrete - Item No. 21247
Abstract: This standard provides a test method to evaluate coatings containing conductive carbon additive for use as an anode on atmospherically exposed reinforced concrete. The test method primarily consists of exposing concrete ... -
Detection and Mitigation of Stray-Current Corrosion of Reinforced and Prestressed Concrete Structures - Item No. 21427
Abstract: This standard practice describes appropriate prevention and mitigation measures that can be applied to steel reinforced concrete (RC) and prestressed concrete (PC) structures that are, or can be, exposed to stray-currents ... -
Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection - Item No. 21037
Abstract: Provides guidance and best practices to users of interim, or temporary, coatings for corrosion protection of metals, including performance criteria, selection, surface preparation and application, evaluation of coatings, ... -
Application of Tape Coatings for External Corrosion Protection of Buried Metal Pipelines - Item No. 21143
Abstract: Scope of standard. This standard practice presents guidelines for establishing the minimum requirements to ensure the proper selection, application, and performance of tape coatings. These coatings are used as the external ... -
Standard Framework for Establishing Corrosion Management Systems - Item No. 21430
Abstract: Scope of Applicability This Standard is applicable to organizations that manage assets affected by corrosion threats. The Standard should be used to aid in the development of an organization-specific CMS. This Standard ... -
Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate or Strontium Sulfate, or Both, from Solution (for Oil and Gas Production Systems) - Item No. 21228
Abstract: This standard describes a test method to screen scale inhibitors for their ability to prevent precipitation of BaSO4 or SrSO4, or both, from oilfield brines. The test method does not fix such critical variables as test ...