TAPPI - TAPPI

 

Recent Submissions

  • TAPPI T 218 SP 

    Type: standard
    Source: TAPPI - TAPPI:;2011
    Organization : TAPPI - TAPPI
    Abstract: This practice describes the procedure using a Büchner funnel for preparing specimen sheets for reflectance testing of bleached or unbleached pulp whose fibers are readily dispersed in water. The sheets are made at a ...
    Subject(s) : Brightness , Disintegrators , Handsheets , Pulps , Reflectance ,

  • TAPPI TIP 0304-72 

    Type: standard
    Source: TAPPI - TAPPI:;2008
    Organization : TAPPI - TAPPI

  • TAPPI T 555 OM 

    Type: standard
    Source: TAPPI - TAPPI:;2010
    Organization : TAPPI - TAPPI
    Abstract: This method measures the roughness of paper and paperboard under conditions intended to simulate the nip pressures and backing substrates found in printing processes. It is applicable to coated and uncoated papers and ...
    Subject(s) : Air flow , Paper , Paperboard , Printability , Smoothness ,

  • TAPPI TIP 0304-15 

    Type: standard
    Source: TAPPI - TAPPI:;2002
    Organization : TAPPI - TAPPI

  • TAPPI T 244 CM 

    Type: standard
    Source: TAPPI - TAPPI:;2011
    Organization : TAPPI - TAPPI
    Abstract: Scope and summary
    This method describes a procedure for determining the acid-insoluble ash content of cellulose samples.
    The sample is dry-ashed and the residue treated with hydrochloric acid. The ...
    Subject(s) : Acid insolubles , Ash , Ash content , Impurities , Paper , Paperboard , Pulp , Silica , Silicates , Wood ,

  • TAPPI TIP 0804-09 

    Type: standard
    Source: TAPPI - TAPPI:;2001
    Organization : TAPPI - TAPPI

  • TAPPI T 839 OM 

    Type: standard
    Source: TAPPI - TAPPI:;2012
    Organization : TAPPI - TAPPI
    Abstract: This method describes procedures for determining the edgewise compressive strength, with flutes vertical, loading perpendicular to the axis of the flutes, of a short column of single-, double-, or triple-wall corrugated ...

  • TAPPI T 627 OM 

    Type: standard
    Source: TAPPI - TAPPI:;2009
    Organization : TAPPI - TAPPI

  • TAPPI TIP 0404-25 

    Type: standard
    Source: TAPPI - TAPPI:;2009
    Organization : TAPPI - TAPPI

  • TAPPI TIP 0502-14 

    Type: standard
    Source: TAPPI - TAPPI:;2010
    Organization : TAPPI - TAPPI
    Abstract: Instrumentation to measure, monitor, and troubleshoot the wet end of the paper machine is widely used to increase the knowledge of the papermaker. The objective of this technical publication is to provide the industry with ...
    Subject(s) : Forming , Forming fabrics , Instruments , Monitors , Testing , Troubleshooting , Wet ends ,

  • TAPPI T 262 SP 

    Type: standard
    Source: TAPPI - TAPPI:;2012
    Organization : TAPPI - TAPPI
    Abstract: This practice describes a procedure for the preparation of mechanical pulps prior to physical testing.
    It is for use with pressure groundwood, refiner mechanical, chemimechanical, thermomechanical, and chemithermomechanical ...

  • TAPPI T 832 OM 

    Type: standard
    Source: TAPPI - TAPPI:;2012
    Organization : TAPPI - TAPPI
    Abstract: The water absorptivity of corrugating medium is measured by floating a specimen on the surface of a vessel of water and determining the time for the specimen to become saturated.
    This method is applicable to corrugating ...

  • TAPPI TIP 0304-32 

    Type: standard
    Source: TAPPI - TAPPI:;2009
    Organization : TAPPI - TAPPI

  • TAPPI UM 240 

    Type: standard
    Source: TAPPI - TAPPI:;2010
    Organization : TAPPI - TAPPI
    Abstract: The objective of this method is to determine the harmful shive content of mechanical pulps by screening on a laboratory flat screen.
    Subject(s) : Flat screens , Laboratories , Mechanical pulps , Pulps , Screens , Shives ,

  • TAPPI T 207 CM 

    Type: standard
    Source: TAPPI - TAPPI:;2008
    Organization : TAPPI - TAPPI

  • TAPPI TIP 0304-11 

    Type: standard
    Source: TAPPI - TAPPI:;2002
    Organization : TAPPI - TAPPI

  • TAPPI T 453 SP 

    Type: standard
    Source: TAPPI - TAPPI:;2013
    Organization : TAPPI - TAPPI
    Abstract: This practice specifies the procedure for dry heat treatment of paper or board, and the general procedure for testing the heat-treated materials. The purpose is to obtain, by an accelerated aging test, inferences regarding ...

  • TAPPI TIP 0420-12 

    Type: standard
    Source: TAPPI - TAPPI:;2012
    Organization : TAPPI - TAPPI
    Abstract: This Technical Information Paper is provided to assist in evaluating performance of single stage, liquid ring vacuum pumps. Cone ported liquid ring vacuum pumps are the most common source of paper machine vacuum in the ...

  • TAPPI T 807 OM 

    Type: standard
    Source: TAPPI - TAPPI:;2011
    Organization : TAPPI - TAPPI
    Abstract: Scope and summary
    This method describes a procedure for measuring the bursting strength of linerboard using a disk shaped diaphragm. Basis weights for this method should be 98 g/m2 (20#/MSF) ...
    Subject(s) : Burst strength , Linerboards ,

  • TAPPI TIP 0404-20 

    Type: standard
    Source: TAPPI - TAPPI:;2004
    Organization : TAPPI - TAPPI

View more