SSPC PS 10.01

Hot-Applied Coal Tar Enamel Painting System

contributor author	SSPC - The Society for Protective Coatings
date accessioned	2017-09-04T15:15:43Z
date available	2017-09-04T15:15:43Z
date copyright	11/01/1982 (E 2004)
date issued	2004
identifier other	ARPLIBAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;jsessionid=47037D83FCDCAC426159DD6E273C9FCD/handle/yse/14768
description abstract	This specification covers a hot-applied coal tar painting system for underground and underwater steel structures, consisting of a primer and two hot-applied coats. This system is suitable for use on parts or structures exposed in Environmental Zones 2C (fresh water immersion), 3B (chemical, neutral), and 3C (chemical, alkaline). It has good abrasion resistance. It is also suitable for underground use. It must be used with discretion for immersion in corrosive chemicals since the coating is dissolved by some organic solvents and attacked by oxidizing solutions. The coal tar enamel must be topcoated with coal tar emulsion when exposed to sunlight to prevent checking and alligatoring.
language	English
title	SSPC PS 10.01	num
title	Hot-Applied Coal Tar Enamel Painting System	en
type	standard
page	2
status	Active
tree	SSPC - The Society for Protective Coatings:;2004
contenttype	fulltext