درباره ما
NAVY - YD - Naval Facilities Engineering Command: Recent submissions
Now showing items 1-20 of 126
-
MIL-DTL-28619D
Abstract: This specification covers stato mooring anchors, including stabilizers, wedges, and palm extensions.
The anchor, with stabilizers, wedges, and palm extensions, should be one of the following classes, as specified (see ...Subject(s) : Palm extensions , Shank , Stabilizers , Wedges , -
A-A-50472A
Abstract: The General Services Administration has authorized the use of this commercial item description in preference to Style B, Type II and Type III of Military Specification MIL-H-19253C. -
MIL-DTL-17505F
Abstract: This specification covers smooth-bore hose and hose assemblies for suction and discharge service in the transfer of fuels, such as Navy special fuel oil, diesel fuel, oil, jet fuel (JP-5 or JP-8), motor gasoline, and ...Subject(s) : Fuels , Petroleum transfer , -
OO-S-873C
Abstract: This specification covers gasoline or diesel-engine powered, self-propelled, rider operated, industrial type sweepers equipped with a vacuum type dust control system and hopper capacity to collect and transport sweepings ... -
A-A-59244
Abstract: This commercial item description (CID) covers two types of self-propelled, crawler mounted, drifter drills (referred to hereinafter as "track drill"), having not less than a 4.75-inch (121 millimetre (mm)) cylinder bore. ... -
MIL-STD-2202A
Abstract: The purpose of this Military Standard is to define generic Factory Tests for Energy Monitoring and Control Systems (EMCS), Utility Monitor and Control Systems (UMCS) and Utility Control Systems (UCS). These tests are to ...Subject(s) : Analysis procedures , Unitary command unit , Utility computer command unit , Verification plans and reports , -
GGG-W-648B
Abstract: This specification covers lineman\'s wrenches used in poleline work. The wrenches were formerly covered by GGG-W-644.
Wrenches shall be of the lineman\'s type and of the following sizes, as specified (see 6.2 ... -
MIL-HDBK-1012/1
Abstract: This military handbook, MIL-HDBK-1012/1, establishes criteria for the design of electronic facilities. -
S-R-2834
Abstract: This specification covers multifin-type steel radiators, with mounting brackets and covers. Intended Use: The radiators covered by this specification are intended for use with hot water and steam heating ...Subject(s) : Finned tube , IBR , Sectional enclosure , Steel fins , -
A-A-59243
Abstract: This commercial item description (CID) covers self-propelled, diesel-engine-driven, hydraulic operated, 12 and 20 cubic yard (yd3) (9.17 and 15.29 cubic metre (m3)) heaped capacity, earth moving, ... -
A-A-50555
Abstract: This commercial item description covers automatic, electric-motor-driven, duplex, centrifugal, wet-pit type, sewage pumps. Capacities for each pump of the duplex unit range from 50 to 1,500 gallons per minute (gpm) (3.15 ...Subject(s) : Pump , vertical , -
MIL-V-18436F
Abstract: This specification covers bronze, cast-iron, and steel body check valves with regrinding, renewable, or regrinding-renewable disks and seats. Intended Use: Check valves are intended for use in pipelines to ...Subject(s) : Bronze Body , Butterfly check valves , Cast Iron check valves , Check valves , Lift check valves , Steel check valves , Swing check valve , Tilting-Disk check valves , Valves , check , -
GGG-W-644C
Abstract: This specification covers socket wrenches of the cross type and double end type (with bar handle) for installing and removing automotive vehicle wheel nuts.
Federal specifications do not include all varieties of the ... -
MIL-HDBK-1002/3
Abstract: This military handbook prescribes the structural design criteria for structures fabricated of structural steel and related materials. Recommendations in this handbook pertain to structures constructed from hot rolled steel ... -
A-A-59242
Abstract: This commercial item description (CID) covers diesel-engine-driven, crawler mounted, hydraulically operated, excavators. The excavators covered by this CID are used in digging or moving loose gravel, sand, or hardpack soil. -
A-A-50577
Abstract: This specification covers single axle and tandem axle rear dump semitrailers.Subject(s) : Disposal , Payloads , Productivity , -
RR-F-191K
Abstract: This specification covers general requirements for chain-link fencing and accessories. Intended Use: Fencing fabric, with proper posts, gates, and accessories, for complete fencing is intended for domestic, ...