UL Standard for Safety Emergency Lighting and Power Equipment - Section / Paragraph Reference: See Subject Topics Subject: Topic 1: Representative Luminance Measurement Testing for Exit Signs - Section / Paragraph Reference: 41.1.8 Topic 2: Representative Fluorescent Lamp Loads for Emergency Battery Pack Tests (maximum load verification) )- Section / Paragraph Reference: 46.7, 52A.1, 75.1, 75.2 Topic 3: Equipment with Battery Heaters and Heater Controls- Section / Paragraph Reference: 45.2.3, 46.2, 52A.2 Topic 4: Calculating Extended Operating Time based on Increased Number of Batteries- Section / Paragraph Reference: 70.1.6 (marked operating time) Topic 5: Transformer Requirements for Canadian (C-UL) Certification- Section / Paragraph Reference: Supplement SE Topic 6: Thermally-sensitive Components in Exit Signs- Section / Paragraph Reference: 40.2 Topic 7: “EXIT² Text Legend Observation Test as Representative for a Legend in Other Languages- Section / Paragraph Reference: 41.2.3(b) Topic 8: Alternative / Replacement LED Arrays in Exit Signs- Section / Paragraph Reference: 41.3 Topic 9: Certification of Emergency LED Drivers- Section / Paragraph Reference: Supplements SB and SH Topic 10: Representative Fluorescent Lamp Loads for Battery / Inverter System Tests (Minimum Light Output) - Section / Paragraph Reference: SB4.5, SH3 Topic 11: Emergency Luminaire Maximum Mounting Height Calculations- Section / Paragraph Reference: SH4.2 Topic 12: Vertically Oriented Exit Signs- Section / Paragraph Reference: N/A Topic 13: Exit Signs with a Supplemental Directional Arrow- Section / Paragraph Reference: Section 40 Topic 14: Cord and Plug-Connected Emergency Lighting Equipment- Section / Paragraph Reference: Sections 17 and 18 - Edition 9: February 24, 2006