ASTM - ASTM International: Recent submissions
Now showing items 21-40 of 35226
-
Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
Abstract: 5.1 It is expected that this test method will be suitable for the quantitative determination of total carbon in water that has been used to clean, extract, or sample parts, components, materials, or systems requiring a ... -
Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
Abstract: 5.1 This test method provides for measuring of the minimum conditions of a range of parameters (concentration of oxidant in a flowing mixture of oxidant and diluent, pressure, temperature) that will just support sustained ... -
Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems
Abstract: 3.1 The purpose of this guide is to provide information that may be considered when selecting and qualifying a cleaning agent for oxygen-enriched systems. 3.2 Insufficient cleanliness can result in the ignition of ... -
Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
Abstract: 5.1 This test method is designed to compare alloys and may be used as one method of screening materials prior to service. In general, this test method is more useful for stainless steels than the boiling magnesium chloride ... -
Standard Specification for Welded Copper-Nickel Pipe
Abstract: 18.1 For purposes of determining compliance with the specified limits for requirements of the properties listed in the following table, and observed value or a calculated value shall be rounded as indicated in accordance ... -
Standard Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
Abstract: 5.1 It is expected that this practice will be suitable to identify and quantify contaminants found in systems, system materials, and components used in systems requiring a high level of cleanliness, such as components for ... -
Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
Abstract: 4.1 This practice is especially useful for evaluating the adequacy of quenching when performed on material in the as-quenched condition. The practice may also be used to study the effect of subsequent thermal processes ... -
Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
Abstract: 4.1 This classification involves alphabetical ratings intended only to provide a qualitative guide for materials selection. The ratings are based primarily on the results of standard corrosion tests. 4.2 Interpretations ... -
Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
Abstract: 5.1 This test is a guide for evaluating magnesium anodes. The degree of correlation between this test and service performance has not been fully determined. 5.2 Test specimens from the same casting may not be identical ... -
Standard Test Method for Galling Resistance of Materials
Abstract: 5.1 This test method is designed to rank material couples in their resistance to the failure mode caused by galling and not merely to classify the surface appearance of sliding surfaces. 5.2 This test method should be ... -
Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
Abstract: 5.1 The significance of this test method in any overall measurement program directed toward a service application will depend on the relative match of test conditions to the conditions of the service application. 5.2 This ... -
Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
Abstract: 4.1 The purpose of this guide is to furnish qualified technical personnel with pertinent information for use in selecting materials for oxygen service in order to minimize the probability of ignition and the risk of explosion ... -
Standard Guide for Characterization and Assessment of Vascular Graft Tissue Engineered Medical Products (TEMPs)
Abstract: 4.1 A common therapy to mitigate the pathological effects of blood vessel occlusion or aneurysm-related vascular wall weakening is to reroute blood flow around the diseased vascular regions. Autologous and non-autologous ... -
Standard Specification for Chromates on Aluminum
Abstract: This specification covers the requirements relating to rinsed and non rinsed chromate conversion coatings on aluminum and aluminum alloys intended to give protection against corrosion and as a base for other coatings. ... -
Standard Test Method for Coring Testing of Huber Needles
Abstract: 5.1 This test method determines whether Huber needles are designed and manufactured such that they will not produce a core during simulated implantable port access. 5.2 If a needle produces a core during actual use, leaking ... -
Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
Abstract: 3.1 Use of this practice will maximize the benefits to be gained from atmospheric testing of metallic-coated steel. It will also aid in comparing results from one location to another where similar tests have been conducted. -
Standard Guide for Evaluating Trailing Search Dog Crews or Teams
Abstract: 4.1 A trailing search dog crew or team is required to have, at a minimum, the knowledge, skills, and abilities outlined within this guide. 4.1.1 A trailing search dog crew or team that meets the requirements of this guide ... -
Standard Test Method for Measuring Accuracy After Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
Abstract: 5.1 The purpose of this practice is to provide data that can be used for comparison and evaluation of the accuracy of different CAS systems. 5.2 The use of CAS systems and robotic tracking systems is becoming increasingly ... -
Standard Guide for In-Service Inspection, Maintenance, and Electrical Testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP))
Abstract: 3.1 Compliance with this guide should confirm known and acceptable quality of hand-held insulating live-line tools manufactured using fiberglass meeting Specification F711. The guidance herein is to be considered as a ...