CSA/AM - CSA America, Inc.: Recent submissions
Now showing items 81-100 of 215
-
CSA/AM ANSI LC 4A-2013/CSA 6.32A-2013
Abstract: This standard applies to metallic (copper, steel, stainless steel and malleable iron) press-connect type fittings, and valves (hereafter referred to as fittings unless otherwise specified) for use with fuel gas systems ... -
CSA/AM ANSI Z21.50A-2008/CSA 2.22A-2008
Abstract: Preface: The standards set forth herein apply to the fifth edition of the Standard for Vented Gas Fireplaces, Z21.50-2007 • CSA 2.22-2007 and supersede corresponding standards therein. Following their preparation ... -
CSA/AM ANSI LC 4-2012/CSA 6.32-2012
Abstract: This standard applies to metallic (copper, steel and stainless steel) press-connect type fittings, and valves (hereafter referred to as fittings unless otherwise specified) for use with fuel gas systems intended for ... -
CSA/AM ANSI Z83.8-2016/CSA 2.6-2016
Abstract: This Standard applies to newly produced gas fired-duct furnaces, packaged heaters, and unit heaters with input rates up to and including 10,000,000 Btu/h (2 931 kW) and utility heaters with inputs up to and including 400,000 ... -
CSA/AM ANSI/CSA HGV 4.6-2013
Abstract: This standard contains safety requirements for the material, design, manufacture and testing of manually operated valves for gaseous hydrogen vehicle fueling stations. This standard applies to newly manufactured valves. ... -
CSA/AM ANSI Z21.19-2014/CSA 1.4-2014
Abstract: This Standard covers gas-fired refrigerators having refrigerated spaces for
(1) storage of foods, or
(2) storage of foods and making ice, or
(3) storage of frozen foods and making ice, or (4) storage of foods ... -
CSA/AM ANSI Z21.11.3-2013
Abstract: This standard applies to newly-produced unvented, propane-fired portable emergency use heater systems utilizing a self-contained propane supply in a listed composite cylinder. This appliance is not for use with line voltage. ... -
CSA/AM ANSI Z21.15A-2012/CSA 9.1A-2012
Abstract: General
The manufacturer shall specify the following information:
a. Type of valve or device (see Part IV, Definitions);
b. Maximum and minimum ambient temperature;
c. Capacity (separate ... -
CSA/AM ANSI/CSA HGV 4.1-2013
Abstract: This standard applies to:
a. The mechanical and electrical features of newly manufactured systems that dispense compressed hydrogen gas for vehicles (HGV) where such systems are intended primarily to dispense the fuel ... -
CSA/AM ANSI Z21.10.3-2015/CSA 4.3-2015
Abstract: This Standard applies to newly produced, large automatic storage water heaters having input ratings above 75,000 Btu/hr (21 980 W), instantaneous water heaters, circulating water heaters including booster water heaters ... -
CSA/AM ANSI/CSA LC 3-2000
Abstract: These requirements apply to:
a. Appliance stands which are used for supporting an appliance at the proper height to meet applicable codes requiring flammable vapor ignition sources such as burners, burner ignition ... -
CSA/AM ANSI Z21.63-2014/CSA 11.3-2014
Abstract: This Standard applies to unvented portable type gas camp heaters of the catalytic and infrared type only up to and including a maximum input of 12,000 Btu/hr (3 517 w) using propane, butane, and liquefied petroleum gas ... -
CSA/AM ANSI Z21.5.1-2015/CSA 7.1-2015
Abstract: This Standard applies to newly produced Type 1 clothes dryers (see Clause 3, Definitions), hereinafter referred to as dryers, constructed entirely of new, unused parts and materials:
a) for use with natural gas;
b) ...