MIL-C-21852F

Abstract

This specification covers the requirements for a nylon taffeta cloth suitable both as a base fabric without coating or for coating with chloroprene rubber or other type coatings. <br>The cloth shall be of the following types as specified (see <a>6.2</a>): </span><pre> Type I - 1.2 oz/yd² (41g/m²) Type II - 1.5 oz/yd² (51g/m²) Type III - 2.0 oz/yd² (68g/m²) Class 1 - Plain finish Class 2 - Water repellent treated Type IV - 1.9 oz/yd² (64g/m²)</pre> <br> <strong>Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Officer in Charge, Navy Clothing and Textile Research Facility, 21 Strathmore Road, Natick, MA 01760-2490 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.</strong> <br><b><u>Intended Use:</u></b> The cloth covered by this specification is intended for use in the following: <pre> Type I and II - For use in fabrication of Army cargo parachutes Type III - For use in fabrication of special clothing (Navy) Linings in uniform clothing (Array and MC), Sleeping bags (Army) Type IV - For use in linings of uniform clothing (AF, Navy, CG and Army)</pre> <br>