درباره ما
ISA - International Society of Automation: Recent submissions
Now showing items 161-180 of 258
-
ISA 12.12.01
Abstract: This standard applies only to equipment, circuits, and components designed specifically for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations as defined in the National ... -
ISA 95.00.06
Abstract: This part of ISA-95 defines a model of a set of messaging services for information exchanges across Levels 3 and 4, and within Level 3, between applications performing business and manufacturing activities. This standard ... -
ISA TR50.02, PART 9
Abstract: INTRODUCTION
FIELD BUS PROCESS CONTROL USER LAYER TECHNICAL REPORT
The User Layer Technical Report is written as a functional design document for a hypothetical process control system. As such it is very complete ... -
ISA 82.03
Abstract: This standard applies to electrical, electronic (analog/digital) and electromechanical process measurement and control equipment which:
1) measures and controls directly or indirectly an industrial process through a ... -
ISA TR18.2.6
Abstract: General applicability
This technical report covers the application of alarm management principles in ISA-18.2 to batch and discrete processes. The general principles and techniques described in this ... -
ISA RP76.0.01
Abstract: The attached inspection guidelines are recommended for use during structured analyzer system inspection. The inspection should be performed by qualified individuals. This recommended practice is intended to be a guide and ... -
ISA 60079-25
Abstract: This standard contains the specific requirements for construction and assessment of intrinsically safe electrical systems, type of protection "i", intended for use, as a whole or in part, in Class I, Zone ... -
ISA 67.03
Abstract: This standard covers identification and quantitative measurement of reactor coolant system leakage in light water cooled power reactors. Leak detection for gas and liquid metal cooled reactors and for containment building ... -
ISA 84.00.01 P2
Abstract: ANSI/ISA-84.00.01-2004 Part 2 (IEC 61511-2 Mod) provides guidance on the specification, design, installation, operation and maintenance of Safety Instrumented Functions and related safety instrumented system as ... -
ISA 77.13.01
Abstract: This standard covers the design requirements and operator interface for steam turbine bypass systems for drum and once-through steam generators and combined cycle plants. Hardware configurations are suggested to obtain the ... -
ISA TR77.42.02
Abstract: This technical report is intended to provide guidance in the application of differential pressure measurement techniques for measuring water level in boiler steam drums. The report also provides guidance on the use of ... -
ISA 60079-2
Abstract: This standard contains the specific requirements for the construction and testing of electrical apparatus with pressurized enclosures, of type of protection "p", intended for use in hazardous (classified) locations ... -
ISA 61241-0
Abstract: This standard specifies general requirements for the design, construction, testing and marking which is applicable to electrical apparatus protected by any recognized protection technique ... -
ISA TR12.24.01
Abstract: ISA-TR12.24.01 is concerned with the classification of hazardous areas where flammable gas or vapor risks may arise, in order to permit the proper selection and installation of apparatus for use in such hazardous ... -
ISA TR18.2.4
Abstract: Exclusions
The following is a list of items not discussed in this technical report. In general they are left out of this report, not because they are unimportant, but because they are already covered ... -
ISA 92.00.01
Abstract: This standard provides minimum requirements for the construction, performance, and testing of portable, transportable, mobile, and stationary electrical apparatus whose purpose is for the detection, measurement and ... -
ISA TR84.00.04 PART 1
Abstract: Purpose
ANSI/ISA-84.01-1996 has been retired and replaced with ANSI/ISA-84.00.01-2004 Parts 1-3 (IEC 61511 Mod). The new standard is the ANSI/ISA adoption of the international standard, IEC 61511, and ... -
ISA 93.00.01
Abstract: This Standard applies to the classification of valve design and provides the methods for the testing of valve stem(s) and body seal(s). This Standard is not intended for production testing and excludes control valves. ... -
ISA 88.00.02
Abstract: This Part 2 standard on Batch Control defines data models that describe batch control as applied in the process industries, data structures for facilitating communications within and between batch control implementations, ... -
ISA 5.06.01
Abstract: The scope of this standard is:
• Covers real-time batch, discrete and continuous process automation systems.
• Defines regulatory, event-driven and time-driven control system actions.
• ...Subject(s) : the abbreviated description of the instrument or loop for use on group displays and others having limited space. ,