درباره ما
ISA - International Society of Automation: Recent submissions
Now showing items 21-40 of 258
-
ISA 75.08.01
Abstract: Scope: This standard applies to integral flanged globe-style control valves, sizes 15 mm (1/2 inch) through 400 mm (16 inches), having top, top and bottom, port, or cage guiding. Pressure Classes 125 flat face, and 150, ... -
ISA 18.2
Abstract: Scope: General applicability This standard specifies general principles and processes for the lifecycle management of alarm systems based on programmable electronic controller and computer -based human-machine interface ... -
ISA 75.05.01
Abstract: Scope: This document contains terminology for control valves. Purpose To provide a glossary of definitions commonly used in the control valve industry. -
ISA TR18.2.7
Abstract: Scope: General considerations This technical report provides guidance on how to integrate packaged systems (PSs) into a BPCS-based centralized alarm system. The scope includes discussing various issues that can arise when ... -
ISA TR18.2.2
Abstract: Scope: General This technical report was written in support of the standard ANSI/ISA-18.2-2016, Management of Alarm Systems for the Process Industries (March 2016), commonly referred to as ISA-18.2. This technical report ... -
ISA 96.02.01
Abstract: Scope: This standard covers the development of specifications, minimum design requirements and sizing criteria for electric actuators. This standard is not intended to address the range of compact, light duty low torque ... -
ISA TR84.00.09
Abstract: Scope: This document is intended to address and provide guidance on integrating the cybersecurity lifecycle with the safety lifecycle as they relate to Safety Controls, Alarms, and Interlocks (SCAI), inclusive of Safety ... -
ISA 61241-2
Abstract: This standard gives requirements on the design, construction, testing and marking of electrical apparatus for use in combustible dust atmospheres in which a protective gas (air or inert gas), maintained at a pressure ... -
ISA TR108.1
Abstract: Scope of this document
Part 1 describes concepts and terminology necessary to understand and communicate effectively about intelligent device management. It gives an overview of the basic concepts of ... -
ISA 75.17
Abstract: This standard establishes a method to predict the noise generated in a control valve of standard design by the flow of compressible fluid and the resulting noise outside of the pipe and downstream of the valve. The ... -
ISA 96.03.03
Abstract: This standard provides general requirements for the development of specifications for pneumatic vane type actuators.
This document applies to actuators with a maximum allowable operating pressure (MAOP) up to 150 psig ... -
ISA TR98.00.02
Abstract: This document is intended to supply a general list of work-oriented functions, activities, tasks and duties that an instrument, instrument/electrical, automation or control system technician should be skilled at in order ... -
ISA 92.04.01 PART I
Abstract: This Standard addresses the details of construction, performance, and testing of portable, mobile, and stationary electrical instruments used to provide a warning of the presence of oxygen-deficient or oxygen-enriched ... -
ISA 75.08.03
Abstract: This standard applies to socket weld-end globe-style control valves, sizes 1/2 inch (15 mm) through 4 inches (100 mm), and screwed-end globe-style control valves, sizes 1/2 inch (15 mm) through 2 1/2 inches (65 mm), having ... -
ISA RP60.4
Abstract: This recommended practice covers the type, content, and extent of documentation required as record data and information particular to a control center and control center facility. It is written to provide guidelines covering ... -
ISA TR5.1.01/TR77.40.01
Abstract: The scope of this technical report is to expand on and illustrate usage of function block symbols and functions and to prepare examples in development of complex function block symbols and functions.
Purpose ... -
ISA TR12.2
Abstract: Introduction
When electrical equipment is used in locations where fire or explosion hazards may exist due to flammable gases or vapors, flammable liquids, combustible dust, or ignitible fibers or ... -
ISA TR52.00.01
Abstract: The usual concept that working standards are less accurate than reference standards and that the environmental requirements are less demanding is the basis for this technical report. The same concept carries over, in ... -
ISA RP60.2
Abstract: This portion of RP60 is included as a guide to initiating, designing, specifying, procuring, testing, accepting, and installing a control center and its supporting facilities. The information is intended to provide a broad ... -
ISA 37.1
Abstract: This Standard covers transducers used in electrical and electronic measuring systems.
It is realized that this Standard may not be wholly suitable for transducers used in automatic control systems and in some other ...