درباره ما
TIA - Telecommunications Industry Association
Browse by
Recent Submissions
-
TIA EIA-411-A
Abstract: PREFACE
The objectives of EIA-411-A, Electrical and Mechanical Characteristics of Earth Station Antennas for Satellite Communications," are the following:
(a) to provide standard terms, definitions, ... -
TIA TIA-136-750
Abstract: Purpose and Scope
The General UDP Transport Service, GUTS, is a general-purpose application data delivery service. The General UDP Transport Service increases flexibility of adding ... -
TIA TSB-87-2018
Abstract: Introduction
This Part presents a tutorial on the usage of the Equipment IDentifier (EID) for manufacturers of M-ESs. This Part also provides a template application form to be used in acquiring a ... -
TIA J-STD-102
Abstract: This Standard defines operational testing procedures for the communications between the Federal Alert Gateway and the Commercial Mobile Service Provider (CMSP) Gateway over the C-Interface. This includes operational testing ... -
TIA TIA-1046
Abstract: The objective of these tests is to demonstrate mobile station or base station compliance to Data Services messaging and protocol requirements in the cdma2000 family of standards, with emphasis on reference [1], ... -
TIA TIA/EIA-136-210-A
Abstract: This document defines the minimum performance specifications for non-bit-exact implementations of TIA/EIA-136-410 speech codecs operating in CTX (DTX-high) and CNG (DTX-low) operation under channel error free conditions. ... -
TIA TIA-1019-A
Abstract: The scope of this Standard is to provide construction considerations and loading requirements for structures under construction related to antenna supporting structures and antennas. The Standard addresses the requirements ... -
TIA TIA-735
Abstract: For this revision of this Standard, the advanced CDMA features include: Network Directed System Selection (NDSS) and Subscriber Confidentiality (SC) supported by TMSI. -
TIA TIA-1188
Abstract: This document provides a listing of femtocell network configuration parameters. This document contains parameters, definitions, types, values and ranges necessary for auto-configuration interoperability.
TIA TIA-4959
Abstract: This Standard details definitions, methods of measurement, and minimum performance characteristics for access terminals. This Standard shares the purpose of [1] by ensuring that an access terminal can obtain service in any ...TIA TIA-1074-1
Abstract: The purpose of this document is to specify the modifications to [MAP] and [OTA] for OTA support of the MEID.TIA TIA-568-C.2
Abstract: This Standard specifies minimum requirements for balanced twisted-pair telecommunications cabling components that are used up to and including the telecommunications outlet/connector and between buildings in a campus ...TIA TIA-856.500-C
Abstract: General Overview
The Default Signaling Application encompasses the Signaling Network Protocol (SNP) and 5 the Signaling Link Protocol (SLP). Protocols in each layer use SNP to exchange messages. SNP is also used ...TIA TIA-1080-B-1
Abstract: The present document defines the cdma2000 application for cdma2000 network operation.
The present document specifies:
• Specific command parameters;
• File structures;
• Security functions; ...TIA TIA-41.000-E-9
Abstract: This part defines the range of application of the current issue of the series. It focuses on overall objectives and basic assumptions. Procedural details are presented in the other recommendations.TIA TIA-707.11-B
Abstract: General Description
This chapter defines requirements for support of high speed packet data transmission capability on TIA/EIA/IS-2000 spread spectrum systems. Packet data transmission is supported on ...