CSA - CSA Group: Recent submissions
Now showing items 241-260 of 5597
-
CSA C22.2 NO. 2459-08
Abstract: This Standard covers insulated multi-pole mating or non-mating splicing wire connectors intended for field wiring and factory wiring for use in accordance with the Canadian Electrical Code, Part I, in Canada, and NFPA 70, ... -
CSA CAN/CSA-C22.2 NO. 60601-2-8-12
Abstract: Replacement:
This international standard applies to the basic safety and essential performance of therapeutic X-RAY EQUIPMENT with NOMINAL X-RAY TUBE VOLTAGES in the range 10 kV to 1 MV when connected to ... -
CSA CAN/CSA-ISO/IEC 21408:04
Abstract: This International Standard specifies the signalling protocol for the support of the Simple Dialog supplementary service (SS-SD) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected ... -
CSA B149.5-10
Abstract: This Code applies to the installation, servicing, and repair of propane fuel system components and tanks on highway vehicles for the provision of motive power. This does ... -
CSA CAN/CSA-ISO/IEC 7498-3-00
Abstract: This Recommendatjon I International Standard:
a) defines general mechanisms for the use of names and addresses to identify and locate objects in the OSIE; and
b) defines the use of these mechanisms wihn the layered ... -
CSA CAN/CSA-Z259.2.2-98
Abstract: This Standard specifies the requirements for all self-retracting devices (SRDs) used as connecting components in personal fall-arrest systems. SRDs are further classified in this Standard according to method of use and ... -
CSA CAN/CSA-C22.2 NO. 248.3-00
Abstract: This Part applies to Class CA and CB fuses rated 60 A or less and 600 V ac. DC ratings are optional. -
CSA CAN/CSA-C22.2 NO. 257-06
Abstract: This Standard specifies the electrical requirements for safe interconnection of inverter-based micro-distributed resource (micro-DR) systems to low-voltage systems connected to distribution systems.
The output of these ... -
CSA CAN/CSA-Z15001:12
Abstract: This International Standard specifies requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications, which can come into contact with oxygen in normal condition ... -
CSA CAN/CSA-ISO/IEC 15693-2:07
Abstract: This part of ISO/IEC 15693 specifies the nature and characteristics of the fields to be provided for power and bi-directional communications between vicinity coupling devices (VCDs) and vicinity cards (VICCs).
This ... -
CSA CAN/CSA-E60335-2-69-01
Abstract: This clause of part 1 is applicable except as follows.
Addition:
This standard applies to electrical motor-operated vacuum cleaners and includes appliances and stationary equipment specifically designed ...