درباره ما
Browsing ASTM - ASTM International by Issue Date
Now showing items 21-40 of 35226
-
ASTM A739 REV A
Abstract: This specification2 covers hot-wrought, ferritic alloy steel bars for elevated temperature or pressure-containing parts suitable for fusion welding or both.
The bars are furnished in the following grades: ...Subject(s) : alloy steel bars , high-temperature applications , hot-wrought steel bars , pressure-containing parts , steel bars , temperature service application—high , -
ASTM D1992
Abstract: This guide covers test methods for synthetic plasticizers that are used in rubber applications.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the ... -
ASTM D3827
Abstract: This test method covers a procedure for estimating the equilibrium solubility of several common gases in petroleum and synthetic lubricants, fuels, and solvents, at temperatures between 0 and 488 K.
This test method ...Subject(s) : gases , -
ASTM D2226
Abstract: This classification is intended to establish classification and test methods for certain types of oil used in extending and processing styrene-butadiene rubbers (SBR) and butadiene rubbers (BR). Its purpose is for ... -
ASTM D4001
Abstract: This test method describes the test procedures for determining the weight-average molecular weight Mw of polymers by light scattering. It is applicable to all nonionic homopolymers (linear or branched) ... -
ASTM RR: D02-1307
Abstract: INTRODUCTION
The fitness-for-use of analytical methods for the determination of sulfur content is increasingly at issue as the production and use of low-sulfur fuels is regulated. In this study, the ... -
ASTM RR: D02-1309
Abstract: Introduction
The fall 1991 J ballot included a revision of D-3241 to include both pneumatic and hydraulic JFTOTs. The ballot received several negatives. The primary negative, from Bill Taylor, was ... -
ASTM D4315
Abstract: These test methods cover chemical and physical tests for zinc oxide that are considered to be important to its use in rubber compounding.
This standard does not purport to address all of the safety concerns, if ... -
ASTM D4676
Abstract: This classification covers antidegradants used in rubber and where appropriate defines their important chemical and physical characteristics for use in rubber.
The general term "antidegradant" describes materials used ... -
ASTM D5574
Abstract: These test methods cover the principles for establishing allowable mechanical properties for adhesives that can be used to design adhesive-bonded joints for structural components and assemblies of wood or wood with other ... -
ASTM E939
Abstract: This test method is used to evaluate the repellency of promising compounds that have undergone primary laboratory studies and have been approved for skin application for secondary testing.
This test method is designed ... -
ASTM D2396
Abstract: These test methods cover the determination of the powder-mix time of a general-purpose poly(vinyl chloride) (PVC) resin.
The values stated in SI units are to be regarded as standard.
This standard does not ... -
ASTM E1662 REV A
Abstract: This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for suitable sound and ... -
ASTM E1665 REV A
Abstract: This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for protection of a ... -
ASTM F1583
Abstract: Establishment of Phonetics—This practice covers the establishment of phonetics (including an alphabet, numerals, and punctuations), and the procedures for their use, in communications.
Performance< ... -
ASTM E1664 REV A
Abstract: This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for layout and building ... -
ASTM E1679
Abstract: This practice is a definitive procedure for setting requirements for the serviceability of a building or buildingrelated facility.
This practice is not intended to be used for regulatory purposes.
This practice can ... -
ASTM E1670 REV A
Abstract: This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for operations and ... -
ASTM E1668 REV A
Abstract: This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements in support of recruiting ... -
ASTM E1660 REV A
Abstract: This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for performance to support ...