MIL-DTL-11484/186B

Abstract

This specification is approved for use by all Departments and Agencies of the Department of Defense. <br>The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-11484 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation. <a><img alt="FIGURE" /></a> </span><pre>MATERIAL: Red Brass DIMENSIONS: DIAMETER: &#8541; inch (1.59 cm) (REF) THICKNESS (At Thickest Point): 0.090 inch &#177; 0.010 inch (0.229 cm &#177; 0.025 cm) FINISH: Gold Plated, Matte Finish, Polished Highlights and shall match TIOH Metal Finish Chip Number 8.</pre> <br> <br>NOTES: <br>1. The term (REF) refers to the measurements taken from the Government furnished hub or die. <br>2. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. <br>3. Each lapel button shall be mounted and centered on a polyethylene pad and placed in a rigid hinged plastic box having a transparent lid and opaque bottom section. The box shall have two plastic hinges and catches and shall be approximately 1-&#8539; inches (2.86 cm) square and &#8541; inch (1.59 cm) in overall depth. The pad shall be of sufficient depth to restrict movement of the lapel button when the lid is closed. <br>CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. <br>