MIL-DTL-11484/169C

Abstract

This specification is approved for use by all Departments and Agencies of the Department of Defense. <br>The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-11484 listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation. <a><img alt="FIGURE" /></a> </span><pre>MATERIAL: Gilding Medal DIMENSIONS: HEIGHT (Overall): 9/64 inch (0.36 cm) (REF) WIDTH (Overall): 21/32 inch (1.67 cm) (REF) THICKNESS (At Edge): 0.065 inch &#177; 0.005 inch (0.165 cm &#177; 0.012 cm) FINISH: Hard Enameled, Nickel Plated, Mirror-like Polished and shall match TIOH Metal Finish Chip Number 16.</pre> <br> <br>NOTES: <br>1. The term (REF) refers to the measurements taken from the Government furnished hub or die. <br>2. Enameled areas shall be as indicated. The colors shall conform to the TIOH color chip numbers listed below or the standard sample. <pre> <u>COLOR</u> <u>CHIP NO.</u> Purple 22 Light Blue 30</pre> <br> <br>3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the manufacturer. <br>4. Attaching device shall be prong with pick and wing type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. <br>CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. <br>