درباره ما
SAE - SAE International: Recent submissions
Now showing items 561-580 of 16264
-
Test Procedure for Determining the Resistance of Safety-Glazing Materials, of which One Surface is Plastic, to Simulated Weathering
Abstract: This SAE Recommended Practice determines whether plastic and glass-plastic safety glazing materials will successfully withstand exposure to simulated weathering conditions. -
Global Tests and Specifications for Automotive Engine Oils
Abstract: This SAE Information Report lists engine and laboratory tests for service fill engine oils which are associated with specifications and classifications established outside of SAE J304 and SAE J183. These specifications and ... -
Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric)
Abstract: This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials ... -
Ignition Cable Assemblies
Abstract: This SAE Standard specifies the general requirements and test methods for non-shielded, high-voltage ignition cable assemblies. -
Hose and Hose Assemblies for Marine Applications
Abstract: SAE J1942, developed through the cooperative efforts of the U.S. Coast Guard and SAE, became effective August 28, 19911, as the official document for nonmetallic flexible hose assemblies for commercial marine use.This SAE ... -
Arresting Hook Installation, Land-Based Aircraft
Abstract: This SAE Aerospace Recommended Practice (ARP) covers the recommended criteria and performance requirements for the design and installation of land-based aircraft emergency and operational arresting hooks for use on runway ... -
Braking Performance - Rubber-Tired, Self-Propelled Cranes
Abstract: This SAE Standard applies to machines as defined in Appendix A. Some of these machines can travel on-highway, but function primarily off-highway. -
High-Carbon Cast-Steel Grit
Abstract: This SAE Recommended Practice describes the chemical composition, and physical characteristic requirements for high-carbon cast-steel grit, to be used for blast cleaning and etching operations. -
Fusible Links
Abstract: This standard covers supplemental requirements for low tension primary cable intended for use as Fusible Links (Fuse Links) at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems. ... -
Application Layer - Diagnostics
Abstract: SAE J1939-73 Diagnostics Application Layer defines the SAE J1939 messages to accomplish diagnostic services and identifies the diagnostic connector to be used for the vehicle service tool interface. Diagnostic messages ... -
Maximum Exterior Sound Level for Snowmobiles
Abstract: This SAE Recommended Practice establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles.Sound propagation is directly related to the ground cover and ... -
Agricultural and Forestry Off-Road Machinery Control and Communication Network
Abstract: SAE J1939-2 specifies the requirements for application of SAE J1939 in agricultural and forestry equipment. This document specifies the series of documents within the set of SAE J1939 documents that are applicable to ... -
Plastic Motor Vehicle Safety Glazing - Tolerances and Fabrication Details
Abstract: This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are ... -
ABS Exciter Ring Location Standardization
Abstract: This SAE Recommended Practice establishes the Antilock Brake System [ABS] sensor interface and envelope dimensions for standardizing the location of the ABS rings mounted on the inner end of spoke wheels, hubs and hub-rotor ... -
Electrical Charging Systems for Off-Road Work Machines
Abstract: This SAE standard describes alternator physical, performance, and application requirements for heavy-duty electrical charging systems for off-road work machines, including those defined in SAE J1116. -
Standard Oil Filter Test Oil
Abstract: This SAE Standard defines the requirements for an oil to be used in the SAE HS 806 Oil Filter Test Procedures. -
Off-Road Rim Maintenance Procedures and Service Precautions, Diameter Code 20 and Larger
Abstract: This SAE Recommended Practice covers the important fundamental maintenance and service precautions for all off-road single-piece and multi-piece rims. Detailed information on specific procedures concerning mounting, ... -
Service Brake Structural Integrity Requirements—Truck and Bus
Abstract: This SAE Recommended Practice presents requirements for the structural integrity of the brake system of all new trucks, buses, and combinations of vehicles designed for roadway use and falling into the following ... -
Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers
Abstract: This SAE Recommended Practice provides procedures and methods for testing service, spring applied parking, and combination brake actuators with respect to durability, function, and environmental performance. A minimum of ... -
Product Identification Numbering System of Off-Road Work Machines
Abstract: This standard covers self-propelled off-road work machines as categorized in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390.