درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 1121-1140 of 22183
-
-
DIN EN 4309
Abstract: Scope: This European Standard specifies the characteristics of hexagonal nuts, self-locking by plastic ring, normal height, normal across flats, in alloy steel, cadmium plated. Classification: 900 MPa 1) / 120 °C 2) ... -
DIN EN 16974
Abstract: Scope: This European Standard defines a method for the determination of the width related indentation rolling resistance of conveyor belts. The goal is that the method easily and quickly delivers values which are reproducible ... -
DIN EN 1026
Abstract: Scope: This European Standard defines the test method to be used to determine the air permeability of completely assembled windows and doorsets of any material, when submitted to positive or negative test pressures. This ... -
DIN EN ISO/IEC 27043
Abstract: Scope: This International Standard provides guidelines based on idealized models for common incident investigation processes across various incident investigation scenarios involving digital evidence. This includes processes ... -
DIN EN 16718
Abstract: Scope: This European Standard describes a method for determining total organic carbon by calculating the difference between the results of measurements of total carbon (TC) and total inorganic carbon (TIC). The identification ... -
DIN EN 15961
Abstract: Scope: This European Standard specifies a method for the extraction of water-soluble calcium, magnesium, sodium and sulfur (in the form of sulfates), so that the same extract can be used for the determination of each ... -
DIN EN ISO 22630
Abstract: Scope: This International Standard specifies an extraction method which may be used to assess the efficiency of a de-oiling process by comparing the oil content of the oilseed with the residual oil content of the corresponding ... -
LN 9115
Abstract: Scope: Diese Norm legt die Maße und Massen für Elastomer-Schaumstoff-Platten nach dem im Abschnitt 5 aufgeführten Werkstoff fest. -
DIN ISO 13373-2
Abstract: Scope: This part of ISO 13373 recommends procedures for processing and presenting vibration data and analyzing vibration signatures for the purpose of monitoring the vibration condition of rotating machinery, and performing ... -
DIN EN 16942
Abstract: Scope: This European Standard lays down harmonized identifiers for marketed liquid and gaseous fuels. The requirements in this standard are to complement the informational needs of users regarding the compatibility between ... -
DIN EN ISO 17075-2
Abstract: Scope: This document specifies a method for determining chromium(VI) in solutions leached from leather under defined conditions. The method described is suitable to quantify the chromium(VI) content in leathers down to 3 ... -
DIN ISO 9838
Abstract: Scope: This International Standard defines test soles representing — an alpine ski-boot (form A) or at least the bottom part of it to be used for testing alpine ski-bindings for alpine skiing in accordance with ISO ... -
DIN 18299
Abstract: Scope: The general rules given in this standard shall apply for all types of construction work, including those not dealt with separately in a standard of the VOB/C series of standards (DIN 18300 to DIN 18459). Deviating ... -
DIN EN 854
Abstract: Scope: This European Standard specifies requirements for three types of textile reinforced rubber hoses and hose assemblies of nominal bore from 5 to 100. The types are defined in Clause 3. They are suitable for use with: ... -
-
DIN EN ISO 11664-6
Abstract: Scope: This CIE International Standard specifies the method of calculating colour differences according to the CIEDE2000 formula. The Standard is applicable to input values of CIELAB L*, a*, b* coordinates calculated ... -
DIN EN ISO 18847
Abstract: Scope: This International Standard specifies the method for determining the particle density of compressed fuels such as pellets or briquettes. Particle density is not an absolute value and conditions for its determination ... -
DIN 65338
Abstract: Scope: This standard specifies the dimensions for the manufacture of close tolerance hexagon bolts with short-length MJ thread, shoulder, made of titanium alloy with a nominal tensile strength of 1 100 MPa and 315 °C. -
DIN EN ISO 12625-5
Abstract: Scope: This document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a ...