درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 1401-1420 of 22183
-
DIN EN ISO 9692-3
Abstract: Scope: This part of ISO 9692 specifies recommended types of joint preparation for metal inert gas welding, MIG (131), and tungsten inert gas welding, TIG (141), and autogenous TIG welding (142) on aluminium and its alloys. ... -
-
DIN EN ISO 12625-4
Abstract: Scope: This document specifies a test method for the determination of the tensile strength, stretch at maximum force and tensile energy absorption of tissue paper and tissue products. It uses a tensiletesting apparatus ... -
DIN EN 868-3
Abstract: Scope: This European Standard specifies test methods and values for paper, used in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) used as sterile ... -
DIN ISO 11512
Abstract: Scope: This International Standard specifies performance test methods and criteria to enable uniform assessment of the service, secondary and parking brake systems of tracked specially designed forestry machines. This ... -
DIN EN 10305-6
Abstract: Scope: This European Standard specifies the technical delivery conditions for welded cold drawn tubes of circular cross section for use in hydraulic and pneumatic power systems. Tubes according to this part of EN 10305 are ... -
DIN EN ISO 11073-10425
Abstract: Scope: This standard establishes a normative definition of communication between personal health continuous glucose monitor (CGM) devices (agents) and managers [e.g., cell phones, personal computers (PCs), personal health ... -
DIN EN 13241
Abstract: Scope: General This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended ... -
DIN EN ISO 780
Abstract: Scope: This International Standard specifies a set of graphical symbols conventionally used for marking of distribution packages in their physical distribution chain to convey handling instructions. The graphical symbols ... -
DIN EN 12209
Abstract: Scope: This European Standard specifies requirements and test methods for durability, strength, security and functionality of mechanically operated locks and their locking plates: a) for use in doors in buildings; b) for ... -
DIN EN 12697-25
Abstract: Scope: This European Standard specifies three test methods (A1, A2 and B) for determining the resistance of bituminous mixtures to permanent deformation by cyclic compression tests with confinement. The tests make it ... -
DIN EN 12467
Abstract: Scope: This European Standard specifies the technical requirements and establishes methods of inspection and test as well as acceptance conditions for fibre-cement flat sheets, siding shingles and planks (referred to as ... -
DIN EN 581-3
Abstract: Scope: This European Standard specifies the minimum requirements for the safety, strength and durability of all types of outdoor tables for adults, without regard to materials, design/construction or manufacturing processes. ... -
-
DIN EN ISO 11592-1
Abstract: Scope: This part of ISO 11592 specifies the requirements for determination of the maximum propulsion power rating and manoeuvring speed for engine-driven small craft with a length of hull (LH) of less than 8 m (Lh according ... -
DIN EN 15416-3
Abstract: Scope: This European Standard specifies a method for determining the creep deformation of bonded specimens loaded in bending shear. It is applicable to adhesives used in load bearing timber structures. It is suitable for ... -
DIN EN ISO 137
Abstract: Scope: This International Standard specifies the procedure and the measurement conditions for the determination of the wool fibre diameter using a projection microscope. The method is suitable for wool fibres in any form ... -
DIN EN 14196
Abstract: Scope: This European Standard describes a test method for the laboratory determination of the mass per unit area of a sample of clay geosynthetic barrier (GBR-C) in the condition as received. Since manufacturers quote mass ... -
DIN EN 1420
Abstract: Scope: This European Standard specifies a procedure for obtaining a migration water to determine odour and flavour for products made from organic materials intended to come in contact with water for human consumption ... -
DIN EN 16713-1
Abstract: Scope: This European Standard specifies filtration requirements and test methods of filter elements or media, filtration units or systems designed to be used in domestic swimming pools. This standard applies to swimming ...