درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 521-540 of 22183
-
DIN SPEC 91348
Abstract: Scope: This DIN SPEC specifies requirements for the test of non-encapsulated crystalline silicon solar cells for potential induced degradation (PID) that is associated with shunting of the cells. -
DIN EN 4700-002
Abstract: Scope: Diese Europäische Norm legt die Anforderungen an die Bestellung, Herstellung, Prüfung, Kontrolle und Lieferung von Stangen und Profilen aus Stahl und hochwarmfesten Legierungen fest. Sie ist anzuwenden, ... -
DIN EN 10273
Abstract: Scope: This European Standard specifies the technical delivery conditions for hot rolled weldable steel bars for the construction of pressure equipment for use at elevated temperatures with thicknesses given in Table 5. ... -
DIN ISO 14132-4
Abstract: Scope: This part of ISO 14132 applies to astronomical telescopes and gives terms and definitions for astronomical telescopes only. The alphabetical indexes of terms that are common for all published parts of ISO 14132 are ... -
DIN ISO 29661
Abstract: Scope: This International Standard defines terms and fundamental concepts for the calibration of dosemeters and equipment used for the radiation protection dosimetry of external radiation — in particular, for beta, ... -
-
DIN EN 13757-5
Abstract: Scope: This European Standard specifies the protocols to use when performing relaying in wireless meter readout networks. This European Standard is an extension to wireless meter readout specified in EN 13757-4. It supports ... -
DIN EN 14304
Abstract: Scope: This European Standard specifies the requirements for factory made flexible elastomeric foam products which are used for the thermal insulation of building equipment and industrial installations with an operating ... -
DIN EN ISO 11073-10419
Abstract: Scope: The scope of this standard is to establish a normative definition of communication between personal telehealth insulin pump devices (agents) and managers (e.g., cell phones, personal computers, personal health ... -
DIN EN ISO 29841
Abstract: Scope: This International Standard specifies a procedure for the determination of the degradation products pheophytin a, a’ and pyropheophytin a of chlorophylls. The method is applicable to vegetable fats and oils only. -
-
DIN EN 16704-2-2
Abstract: Scope: This European Standard deals with requirements for barriers to give users the possibility to prevent workers from entering the danger zone unintentionally by the use of such barriers. This standard defines minimum ... -
DVS 2715
Abstract: Scope: Purpose and scope The purpose of this technical code is to define procedures for approval of supervisors of welding and/ or soldering or for line managers responsible for thermal spraying. This technical code applies ... -
DIN EN 3375-009
Abstract: Scope: Diese Europäische Norm legt die Anforderungen an elektrische Leitungen, einfach geschirmt, 120 Ohm, Größe 26, Typ WX, für Digitaldatenübertragungen fest. Sie ist in Verbindung mit EN 3375-001 ... -
DIN 8061
Abstract: Scope: This standard applies to straight, circular, seamless pipes of unplasticized polyvinyl chloride (PVC-U), having dimensions as in DIN 8062. Attention is brought to the fact that there are European product standards ... -
DIN EN 1914
Abstract: Scope: This European Standard applies to: — ship\'s boats that shall be carried on inland navigation vessels according to Annex II of Directive 2006/87/EC; — lifeboats if no special life-saving equipment (e.g. ... -
DIN EN 16802
Abstract: Scope: This European Standard describes a procedure for the determination of inorganic arsenic in foodstuffs of marine and plant origin by anion-exchange HPLC-ICP-MS following waterbath extraction. This method has been ... -
DIN EN 16807
Abstract: Scope: This European Standard specifies the term bio-lubricant and minimum requirements for all kinds of biolubricants and bio-based lubricants, while e.g. the EEL [4] refers to specific bio-lubricant families. This European ... -
LN 668
Abstract: Scope: Diese Norm ist für blanken Rundstahl von 2 mm bis 200 mm Durchmesser aus den in Tabelle 4 aufgeführten Werkstoffen anzuwenden. -
DIN EN 16806-1
Abstract: Scope: This part of EN 16806 specifies a test method for the determination of the heat storage and heat release capacity and the phase change temperatures of textile fibres, yarns and fabrics (woven and knitted fabrics, ...