درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 701-720 of 22183
-
DIN EN 14037-5
Abstract: Scope: This European Standard describes the test method and the test installation for determining the thermal output of ceiling mounted heating surfaces according to the specifications 3.1, 3.2. and 3.3. This part applies ... -
DIN EN ISO 14021
Abstract: Scope: This International Standard specifies requirements for self-declared environmental claims, including statements, symbols and graphics, regarding products. It further describes selected terms commonly used in ... -
DIN EN 16603-50-05
Abstract: Scope: This Standard defines the radio communication techniques used for the transfer of information between spacecraft and Earth stations in both directions, and for the tracking systems used for orbit determination. It ... -
DIN EN 4652-213
Abstract: Scope: This European Standard specifies the characteristics of screwed on coupling (TNC interface) coaxial bulkhead receptacle − 50 ohms. The cable to connector assembly is a clamp technology. -
DIN EN ISO 17638
Abstract: Scope: This document specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The techniques are suitable ... -
DIN EN 1873
Abstract: Scope: This European Standard specifies requirements for rooflights made of plastic materials (e.g. GF-UP, PC, PMMA, PVC) and rooflights with upstands made of e.g. GF-UP, PVC, steel, aluminium or wood for installation in ... -
DIN EN ISO 19429
Abstract: Scope: This International Standard provides a system for designating the location of an implant body within a jaw, and is intended for use with the scheme described in ISO 3950. It does not in itself indicate whether the ... -
DIN EN 16760
Abstract: Scope: This European Standard provides specific life cycle assessment (LCA) requirements and guidance for bio-based products, excluding food, feed and energy, based on EN ISO 14040 and EN ISO 14044. This European Standard ... -
DIN EN 1102
Abstract: Scope: This European Standard specifies a procedure to determine the flame spread of textiles for curtains and drapes by testing a vertically oriented specimen in accordance with EN ISO 6941. -
DIN ISO 11745
Abstract: Scope: This International Standard specifies a qualification test for brazers engaged in manual brazing of parts and brazing operators in aerospace construction. NOTE 1 Success in the test is an essential precondition for ... -
DVS 2202 BEIBLATT 5
Abstract: Scope: This supplement covers the assessment of hot-gas extrusion welded joints (WE), which were welded in accordance with DVS 2207-4 and DVS 2207-5, for example. Where appropriate, this guideline can also be applied to ... -
DIN EN 13230-2
Abstract: Scope: This part of the EN 13230 series defines additional technical criteria and control procedures related to the manufacturing and testing of prestressed monoblock sleepers -
-
DIN EN 3660-064
Abstract: Scope: This European Standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational) for heat shrinkable boot, and / or metallic band under the following conditions: The mating ... -
DIN EN 4652-411
Abstract: Scope: Diese Europäische Norm legt die Eigenschaften von koaxialen, 90° abgewinkelten, freien Steckverbindern, 50 Ohm, mit Bajonettkupplung (C-Schnittstelle), fest. Die Verbindung des Steckverbinders mit der ... -
DIN EN 16234-1
Abstract: Scope: This European Standard provides a reference of 40 competences as required and applied at the Information and Communication Technology (ICT) business related workplace, using a common language for competences, skills ... -
-
-
DIN EN ISO 14004
Abstract: Scope: This International Standard provides guidance for an organization on the establishment, implementation, maintenance and improvement of a robust, credible and reliable environmental management system. The guidance ... -
DIN ISO 12164-4
Abstract: Scope: This part of ISO 12164 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-3 to be applied to machine tools (e.g. turning machines, turning-mill ...