درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 21-40 of 39933
-
Standard Practice for Measurement of the Biological Activity of Ricin
Abstract: 5.1 The CFT assay provides a sensitive and reliable method to detect ricin biological activity and results can be generated within 3 h. The assay measures the amount of ricin biological activity when compared to a known ... -
Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
Abstract: This specification covers four conductivities of bare, hard-drawn, round, aluminum-clad steel wire for general use for electrical purposes. The wire shall be composed of a steel core with a substantially uniform and ... -
Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application
Abstract: 5.1 Pesticide regulations for the minimization of drift during pesticide application often require active ingredient (a.i.) product use under defined droplet size conditions. Spray performance with respect to transport and ... -
Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
Abstract: 5.1 This test method is intended to evaluate the material performance after exposure to a standardized set of severe environmental conditions. It is understood that these performance values are dependent upon these ... -
Standard Test Method for Evaluation of the Effectiveness of Handwash Formulations Using the Paper Towel (Palmar) Method of Hand Contamination
Abstract: 5.1 This procedure has been designed to evaluate handwash products using a palmar surface only contamination method. This method is an alternative contamination procedure to that listed in Test Method E1174. The current ... -
Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs
Abstract: 4.1 With the rapid growth of the use of photovoltaic systems in buildings, roof mounted arrays continue to be one of the most prevalent forms of installations. These roof mounted arrays typically feature penetrations into ... -
Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL
Abstract: 5.1 This practice was prepared to meet a growing need for the use of standard sampling plans for inspection by variables in customer procurement, supply and storage, and maintenance inspection operations. The variables ... -
Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
Abstract: 4.1 It is useful to be able to obtain particle size measurement results of a user specified product from multiple instruments and to be able to correlate the results of the measurements. This capability can be advantageous ... -
Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
Abstract: 5.1 This practice describes a procedure to gather data intended to measure the uniformity of exposure conditions upon test specimens for the fire test methods described in Test Methods E119, E814, E1529, E1725, E1966, and ... -
Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products
Abstract: 5.1 The procedure is used to evaluate personal cleansing products containing antibacterial ingredients that are intended to reduce the number of organisms on intact skin. It also may be used to demonstrate the effect of ... -
Standard Guide for Financial Disclosures Attributed to Climate Change
Abstract: 4.1 Uses—This guide is intended for use on a voluntary basis by a reporting entity that provides disclosure in its financial statements regarding financial impacts attributed to climate change. The degree and type of ... -
Standard Specification for Molybdenum and Molybdenum Alloy Plate,
Sheet, Strip, Foil, and Ribbon Abstract: This specification covers unalloyed molybdenum and molybdenum alloy plate, sheet, strip, and foil as follows: Molybdenum 360; Molybdenum 361; Molybdenum Alloy 363; Molybdenum Alloy 364; Molybdenum 365; and Molybdenum Alloy ... -
Standard Practice for Estimating the Environmental Load of Residential Wastewater
Abstract: 5.1 There is increasing concern regarding water quality. The first national-scale U.S. examination of these organic wastewater contaminants in streams, conducted by the Toxic Substances Hydrology Program of the U.S. ... -
Standard Guide to Forensic Engineering
Abstract: 4.1 This guide is intended as a foundation for other E58 Committee standards that are focused on specific technical disciplines, for example Guide E2292. 4.2 The emphasis of this guide is on the practice of forensic ... -
Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
Abstract: 5.1 The purpose of this test method is to measure the net heat flux to or from a surface location. For measurement of the radiant energy component the emissivity or absorptivity of the surface coating of the gage is required. ... -
Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
Abstract: 5.1 Introduction—Mu numbers (friction values) measured by CFME can be used as guidelines for evaluating the surface friction deterioration of runway pavements and for identifying appropriate corrective actions required for ... -
Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
Abstract: 5.1 Personnel that are responsible for the creation, transfer, and storage of ultrasonic test results will use this practice. This practice defines a set of information modules that, along with Practice E2339 and the DICOM ... -
Standard Guide for Powder Particle Size Analysis
Abstract: 4.1 The myriad array of particle size analysis techniques available to the modern-day powder technologist is both daunting and confusing. Many of the techniques are applicable only to certain types of materials, and all ...