درباره ما
ITU-T J.366.6
(Pre-Published) Cx and Dx Interfaces based on the Diameter protocol; Protocol details
Year: 2007
Abstract: The present document defines a transport protocol for use in the IP multimedia (IM) Core Network (CN) subsystem based on Diameter. The present document is applicable to:
The Cx interface between the I-CSCF/S-CSCF and the HSS.
The Dx interface between the I-CSCF/S-CSCF and the SLF.
Whenever it is possible, this document specifies the requirements for this protocol by reference to specifications produced by the IETF within the scope of Diameter. Where this is not possible, extensions to Diameter are defined within this document.
The Third Generation Partnership Project (3GPP) has developed the specification in a form optimized for the wireless environment. This Recommendation references the ETSI version of the 3GPP specification and specifies only the modifications necessary to optimize it for the cable environment. Additions are shown in blue underline and deletions. It is an important objective of this work that interoperability between IPCablecom 2.0 and 3GPP IMS is provided. IPCablecom 2.0 is based upon 3GPP IMS, but includes additional functionality necessary to meet the requirements of cable operators. Recognizing developing converged solutions for wireless, wireline, and cable, it is expected that further development of IPCablecom 2.0 will continue to monitor and contribute to IMS developments in 3GPP, with the aim of alignment of 3GPP IMS and IPCablecom 2.0. The modifications to ETSI TS 29.229 V6.7.0 (2005-12) Cx/Dx Interfaces based on the Diameter Protocol Specificationare listed below.
The Cx interface between the I-CSCF/S-CSCF and the HSS.
The Dx interface between the I-CSCF/S-CSCF and the SLF.
Whenever it is possible, this document specifies the requirements for this protocol by reference to specifications produced by the IETF within the scope of Diameter. Where this is not possible, extensions to Diameter are defined within this document.
The Third Generation Partnership Project (3GPP) has developed the specification in a form optimized for the wireless environment. This Recommendation references the ETSI version of the 3GPP specification and specifies only the modifications necessary to optimize it for the cable environment. Additions are shown in blue underline and deletions. It is an important objective of this work that interoperability between IPCablecom 2.0 and 3GPP IMS is provided. IPCablecom 2.0 is based upon 3GPP IMS, but includes additional functionality necessary to meet the requirements of cable operators. Recognizing developing converged solutions for wireless, wireline, and cable, it is expected that further development of IPCablecom 2.0 will continue to monitor and contribute to IMS developments in 3GPP, with the aim of alignment of 3GPP IMS and IPCablecom 2.0. The modifications to ETSI TS 29.229 V6.7.0 (2005-12) Cx/Dx Interfaces based on the Diameter Protocol Specificationare listed below.
Show full item record
| contributor author | ITU-T - International Telecommunication Union/ITU Telcommunication Sector | |
| date accessioned | 2017-09-04T18:49:30Z | |
| date available | 2017-09-04T18:49:30Z | |
| date copyright | 2007.07.01 | |
| date issued | 2007 | |
| identifier other | ANNUYDAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessioutho9193177793325273135A68A1095801/handle/yse/230817 | |
| description abstract | The present document defines a transport protocol for use in the IP multimedia (IM) Core Network (CN) subsystem based on Diameter. The present document is applicable to: The Cx interface between the I-CSCF/S-CSCF and the HSS. The Dx interface between the I-CSCF/S-CSCF and the SLF. Whenever it is possible, this document specifies the requirements for this protocol by reference to specifications produced by the IETF within the scope of Diameter. Where this is not possible, extensions to Diameter are defined within this document. The Third Generation Partnership Project (3GPP) has developed the specification in a form optimized for the wireless environment. This Recommendation references the ETSI version of the 3GPP specification and specifies only the modifications necessary to optimize it for the cable environment. Additions are shown in blue underline and deletions. It is an important objective of this work that interoperability between IPCablecom 2.0 and 3GPP IMS is provided. IPCablecom 2.0 is based upon 3GPP IMS, but includes additional functionality necessary to meet the requirements of cable operators. Recognizing developing converged solutions for wireless, wireline, and cable, it is expected that further development of IPCablecom 2.0 will continue to monitor and contribute to IMS developments in 3GPP, with the aim of alignment of 3GPP IMS and IPCablecom 2.0. The modifications to ETSI TS 29.229 V6.7.0 (2005-12) Cx/Dx Interfaces based on the Diameter Protocol Specificationare listed below. | |
| language | English | |
| title | ITU-T J.366.6 | num |
| title | (Pre-Published) Cx and Dx Interfaces based on the Diameter protocol; Protocol details | en |
| type | standard | |
| page | 17 | |
| status | Active | |
| tree | ITU-T - International Telecommunication Union/ITU Telcommunication Sector:;2007 | |
| contenttype | fulltext |