درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 441-460 of 22183
-
DIN EN 378-1
Abstract: Scope: This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair ... -
DIN EN 3660-002
Abstract: Scope: Diese Europäische Norm erfasst die Produktnormen, die durch die Technischen Lieferbedingungen EN 3660-001 abgedeckt sind, für Endgehäuse zur Verwendung mit elektrischen und optischen Rund- und ... -
DIN EN 14973
Abstract: Scope: This European Standard specifies electrical and flammability safety requirements for conveyor belts intended for use in underground installations, in the presence of flammable or non-flammable atmospheres. Conveyor ... -
DIN 2304-1
Abstract: Scope: This standard specifies requirements for the high-quality design and workmanship of structural, i.e. loadbearing, adhesive bonds, covering all steps of the adhesive bonding process chain, from design to manufacturing ... -
DIN EN 3997
Abstract: Scope: Diese Norm legt die Anforderungen an Aluminiumlegierung AL-P2024- Al Cu4Mg1 T3 Bleche und Bänder 0,4 mm ≤ a ≤ 6 mm für Anwendungen in der Luft- und Raumfahrt fest. -
DIN EN 4165-013
Abstract: Scope: This European Standard defines cable clamp for 2 and 4 module connectors, series 2 and series 3 used in the family of rectangular electrical connectors -
DIN 91252
Abstract: Scope: battery systems used in electrically propelled road vehicles. It also specifies, as far as appropriate, the dimensions, the position and shape of the terminals, the over-pressure safety devices as well as basic ... -
DIN EN ISO 8331
Abstract: Scope: This document sets out recommendations designed to maintain rubber and plastics hoses and hose assemblies, prior to use, in a condition as close as possible to the condition they were in when they were received and ... -
-
DIN ISO 48
Abstract: Scope: This International Standard specifies four methods for the determination of the hardness of vulcanized or thermoplastic rubbers on flat surfaces (standard-hardness methods) and four methods for the determination of ... -
DIN EN 438-1
Abstract: Scope: This part of EN 438 gives an overview of the standard, and provides guidance in the selection and application of test methods and specifications contained in EN 438-2, EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN ... -
DIN 18314
Abstract: Scope: This standard deals with the production and working of plain and reinforced concrete and mortar, which are applied by spraying and compacting in one operation. This standard does not cover: - the preservation and ... -
DIN EN ISO 16773-2
Abstract: Scope: This part of ISO 16773 gives guidelines for optimizing the collection of EIS data with focus on highimpedance systems. High impedance in the context of intact coatings refers to systems with an impedance greater ... -
DIN ISO 20785-2
Abstract: Scope: This part of ISO 20785 specifies methods and procedures for characterizing the responses of devices used for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in civilian ... -
DIN EN 413-2
Abstract: Scope: This European Standard describes reference and alternative test methods to be used when testing masonry cements to assess their conformity to EN 413-1. It gives the tests on fresh mortar for consistence, water ... -
DIN EN ISO 12217-3
Abstract: Scope: This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft susceptible to swamping are also encompassed. The evaluation ... -
DIN EN 61800-7-201
Abstract: Scope: This part of IEC 61800 specifies profile type 1 for power drive systems (PDS). Profile type 1 can be mapped onto different communication network technologies. The functions specified in this part of IEC 61800 are ... -
DIN EN 10361
Abstract: Scope: This European Standard specifies an inductively coupled plasma optical emission spectrometric method for the determination of nickel content (mass fraction) between 5,0 % and 25,0 % in alloyed steels. The method ... -
DIN EN ISO 17831-1
Abstract: Scope: This part of ISO 17831 defines a determination method for testing the mechanical durability of pellets. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion as ... -
DIN EN 14037-3
Abstract: Scope: This European Standard describes the procedure to determine the rated thermal output (ΦD) and the mean surface temperature (trp) of pre-fabricated ceiling mounted radiant panels. Pre-fabricated ceiling mounted ...