AIAA - American Institute of Aeronautics and Astronautics: Recent submissions

Now showing items 61-70 of 70

    • AIAA G-129 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2012
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: This document provides a recommended test nomenclature for steady-state wind tunnel testing involving force, moment, and pressure data. This guide may be used as a translator (Rosetta stone) between different facilities ...

    • AIAA S-096 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2004
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: This document establishes a top level certification standard for the design, analysis, material selection and characterization, fabrication, test and inspection of the flywheel rotor assembly (FRA) in a flywheel used for ...

    • AIAA G-045 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2003
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: Abstract
      This AIAA Guide supplements the methodology for assessment of experimental uncertainties and techniques for evaluating experimental error sources provided in AIAA Standard S-071A-1999, "Assessment ...

    • AIAA S-133-5 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2013
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: This standard is applicable to systems operating under the Space Plug-and-Play Architecture.
      The SPA 28V Power Service Standard establishes specifications regarding the quality of the power service such as voltage ...

    • AIAA S-102.2.2 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2009
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: This Standard establishes uniform requirements and criteria for performance-based System Reliability Modeling, including planning, performing, documenting, and evaluating. Although it is a common industry practice for ...

    • AIAA S-122 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2007
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: This document, when followed in its entirety, will yield a robust EPS design suitable for very high-reliability space missions. This document specifies general design practices and sets minimum verification and validation ...

    • AIAA R-100A 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2001
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: This Recommended Practice is a collection of techniques for managing parts programs. It addresses the preferred program elements adopted by the aerospace industry (military, civil, and commercial) for parts management. The ...

    • AIAA S-113 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2005
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: This standard establishes criteria for design, manufacture, and performance certification of explosive systems and explosive devices commonly used on launch, upper stage, and space vehicle systems. The requirements contained ...

    • AIAA R-093 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2003
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: Executive summary
      The purposes of this document are (1) to provide an overview of the calibration of subsonic and transonic wind tunnels and (2) to provide a basis for commonality within the wind tunnel ...

    • AIAA SP-108 

      Type: standard
      Source: AIAA - American Institute of Aeronautics and Astronautics:;2004
      Organization : AIAA - American Institute of Aeronautics and Astronautics
      Abstract: This document provides recommended design practices for conceptual engineering studies of nuclear fusion space propulsion systems. Discussion and recommendations are included on key topics including design reference missions, ...