درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 1021-1040 of 9213
-
IEC 62920
Abstract: This document specifies electromagnetic compatibility (EMC) requirements for DC to AC power conversion equipment (PCE) for use in photovoltaic (PV) power systems. The PCE covered by this document can be grid-interactive, ... -
IEC 60793-1-47 (REDLINE + STANDARD)
Abstract: This part of IEC 60793 establishes uniform requirements for measuring the macrobending loss of single-mode fibres (class B) at 1 550 nm or 1 625 nm, category A1 multimode fibres at 850 nm or 1 300 nm, and category A3 and ... -
IEC 60404-8-7
Abstract: This part of IEC 60404 defines the grades of cold-rolled grain-oriented electrical steel strip and sheet in nominal thicknesses of 0,23 mm, 0,27 mm, 0,30 mm and 0,35 mm. In particular, it gives general requirements, magnetic ... -
IEC 62481-5
Abstract: This part of IEC 62481 (the DLNA guidelines) specifies guidelines that define various DLNA Device Profiles. A Device Profile is a collection of DLNA capabilities and features within a DLNA device. A device is compliant ... -
IEC 61000-2-2
Abstract: INTRODUCTION to Amendment 1 This amendment is related to compatibility levels in the frequency range from 2 kHz to 150 kHz. It contains: – compatibility levels for signals from mains communicating systems up to 150 ... -
IEC TR 60893-4
Abstract: This part of IEC 60893 serves as a technical report and presents tables of typical values for properties that are not studied and not given in Table 5 of IEC 60893-3-2:2003/AMD1:2011, IEC 60893-3-3:2003/AMD1:2011, IEC ... -
-
-
IEC TR 63130
Abstract: This document describes the current state of experts’ opinions on the standardization of metal halide lamps to cover the relevant parameters for hot restrike and for dimming in combination with low frequency square ... -
IEC 60335-2-102 (REDLINE + STANDARD)
Abstract: This International Standard deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes, their rated voltage being not more than 250 V for single-phase ... -
IEC 61125
Abstract: This document describes a test method for evaluating the oxidation stability of insulating liquids in the delivered state under accelerated conditions regardless of whether or not antioxidant additives are present. The ... -
IEC 62442-1 (REDLINE + STANDARD)
Abstract: This part of IEC 62442 defines a measurement and calculation method of the total input power for controlgear-lamp circuits when operating with their associated fluorescent lamp(s). The calculation method for the efficiency ... -
IEC 61482-2 (REDLINE + STANDARD)
Abstract: This part of IEC 61482 is applicable to protective clothing used in work where there is the risk of exposure to an electric arc hazard. This document specifies requirements and test methods applicable to materials and ... -
IEC 60799 (REDLINE + STANDARD)
Abstract: This document specifies requirements for cord sets and interconnection cord sets for household and similar general purpose equipment. It does not apply to cord sets for industrial purposes (with plugs and connectors according ... -
IEC TS 62885-1
Abstract: This part of IEC 62885 specifies the physical characteristics of test equipment and material used in tests common for several products covered by standards in the IEC 62885 series for surface cleaning appliances. In addition, ... -
IEC 61937-14
Abstract: This part of IEC 61937 describes the method to convey non-linear PCM bit streams encoded according to the AC-4 format. -
IEC TR 62240-2
Abstract: This part of IEC 62240, which is a Technical Report, focuses on original equipment manufacturers (OEMs) using commercial off the shelf (COTS) semiconductor microcircuits for high performance, high reliability and long ... -
IEC 60900
Abstract: This document is applicable to insulated, insulating and hybrid hand tools used for working live or close to live parts at nominal voltages up to 1 000 V AC and 1 500 V DC. The products designed and manufactured according ... -
IEC 61000-6-4
Abstract: This part of IEC 61000 for emission requirements applies to electrical and electronic equipment intended for use within the environment existing at industrial (see 3.1.12) locations. This document does not apply to equipment ... -
IEC 62887
Abstract: This document is applicable to general aspects of design, manufacturing and test methods for pressure transmitters used in instrumentation systems important to safety in all nuclear power plants (PWR, BWR, FBR, etc.). The ...