درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 1341-1360 of 9213
-
IEC 62841-3-14
Abstract: This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable drain cleaners. NOTE 101 Drain cleaners are also known as pipe cleaners. This standard does not apply to ... -
IEC 62481-4
Abstract: This part of IEC 62481, the DLNA guidelines, specifies DLNA guidelines for DRM Interoperability Solutions (DIS), which are defined as methods to enable the secure transfer and use of protected commercial content between ... -
IEC 61754-7-2
Abstract: This part of IEC 61754 defines the standard interface dimensions for the type MPO family of connectors with two rows of fibres. -
IEC 62153-4-9
Abstract: This part of IEC 62153 applies to metallic communication cables. It specifies a test method for determining the coupling attenuation aC of screened balanced cables. Due to the concentric outer tube, measurements are ... -
IEC 62040-1
Abstract: This part of IEC 62040 applies to movable, stationary, fixed or built-in UPS for use in lowvoltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted ... -
IEC 60335-2-5
Abstract: This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric dishwashers for household and similar purposes that are intended for washing and rinsing dishes, cutlery and ... -
IEC 80601-2-49
Abstract: This part of the 80601 International Standard applies to BASIC SAFETY and ESSENTIAL PERFORMANCE requirements of MULTIFUNCTION PATIENT MONITORS as defined in 201.3.201, hereafter referred to as ME EQUIPMENT or MEDICAL ... -
IEC CISPR TR 18-2 (REDLINE + STANDARD)
Abstract: This part of CISPR 18, which is a Technical Report, applies to radio noise from overhead power lines and high-voltage equipment which may cause interference to radio reception. The frequency range covered by this publication ... -
IEC 62442-3
Abstract: This part of IEC 62442 defines a measurement method for the power losses of electromagnetic transformers as well as the power losses and the standby power of electronic convertors for tungsten-halogen lamps and for LED ... -
IEC 60404-8-8
Abstract: This part of IEC 60404 defines the grades of thin non-oriented electrical steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm, 0,20 mm, 0,25 mm, 0,30 mm and 0,35 mm and of thin grain-oriented electrical ... -
IEC 62486
Abstract: This document specifies requirements for the interaction between pantographs and overhead contact lines, to achieve interoperability. NOTE These requirements are defined for a limited number of pantograph types, referred ... -
IEC 61196-6-4
Abstract: This part of IEC 61196 applies to coaxial communication cables described in IEC 61196-6. It specifies the requirements for 75-7 type CATV drop cables. These cables are used in CATV distribution systems, surveillance and ... -
IEC 62899-303-1
Abstract: This part of IEC 62899 defines standard mechanical dimensions (especially related to the web size) of equipment for printed electronics. This document covers web-based printing equipment, but it can be used for sheet-based ... -
IEC 60811-202
Abstract: This Part 202 of IEC 60811 gives the methods for measuring thicknesses of non-metallic sheath which apply to the most common types of sheathing compounds (cross-linked, PVC, PE, PP, etc.). -
IEC 62888-2
Abstract: This part of IEC 62888 specifies the requirements applicable to the Energy Measurement Function (EMF) of an Energy Measurement System (EMS) for use on board traction units for measurement of energy supplied directly from/to ... -
IEC 60376
Abstract: This document defines the quality for technical grade sulphur hexafluoride (SF6) and complementary gases such as nitrogen (N2) and carbon tetra-fluoride (CF4), for use in electrical equipment. Detection techniques, covering ... -
IEC 61804-2
Abstract: This part of IEC 61804 is applicable to function blocks (FB) for process control. This document specifies FB by using the result of a harmonization work as regards several elements. a) The device model which defines the ... -
IEC 62828-1
Abstract: This Part of IEC 62828 establishes a general framework for defining reference conditions and test procedures applicable to all types of industrial and process measurement transmitters (PMTs) used in measuring and control ... -
IEC 60754-3
Abstract: This part of IEC 60754 specifies the apparatus and procedure for the measurement of the amount of halogens evolved during the combustion of materials taken from electric or optical fibre cable constructions. The method ... -
IEC 62561-4
Abstract: This part of IEC 62561 deals with the requirements and tests for metallic and non-metallic conductor fasteners that are used to retain and support the air-termination, down-conductor and earth-termination systems. This ...