درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 1761-1780 of 9213
-
IEC 61000-1-2
Abstract: Scope: This part of IEC 61000 establishes a methodology for the achievement of functional safety only with regard to electromagnetic phenomena. This methodology includes the implication it has on equipment used in such ... -
IEC 61400-12-1
Abstract: Scope: This part of IEC 61400 specifies a procedure for measuring the power performance characteristics of a single wind turbine and applies to the testing of wind turbines of all types and sizes connected to the electrical ... -
IEC TS 61463
Abstract: Scope: IEC TS 61463, which is a Technical Specification, is applicable to alternating current and direct current bushings for highest voltages above 52 kV (or with resonance frequencies placed inside the seismic response ... -
IEC 60384-1
Abstract: Scope: This part of IEC 60384 is a generic specification and is applicable to fixed capacitors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional ... -
IEC 62550
Abstract: Scope: This document describes requirements for spare parts provisioning as a part of supportability activities that affect dependability performance so that continuity of operation of products, equipment and systems for ... -
IEC 62803
Abstract: Scope: This International Standard provides a method for measuring the frequency response of optical-to-electric conversion devices in wireless communication and broadcasting systems. The frequency range covered by this ... -
IEC 60794-3-70
Abstract: Scope: This part of IEC 60794 is a family specification that covers outdoor optical fibre cables intended for rugged terrestrial rapid/multiple deployment. These cables, with enhanced mechanical, environmental and ingress ... -
IEC 60793-1-1 (REDLINE + STANDARD)
Abstract: Scope: This part of IEC 60793 lists and gives guidance on the use of documents giving the uniform requirements for measuring and testing optical fibres, thereby assisting in the inspection of fibres and cables for commercial ... -
IEC 61340-5-1 (REDLINE + STANDARD)
Abstract: Scope: This part of IEC 61340 applies to activities that: manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment ... -
IEC TR 61328
Abstract: Scope: This document, which is a Technical Report, provides recommendations for the selection and testing where necessary of conductor stringing equipment and accessory items used for the installation of bare and insulated ... -
-
IEC 62660-3
Abstract: Scope: This part of IEC 62660 specifies test procedures and the acceptance criteria for safety performance of secondary lithium-ion cells and cell blocks used for the propulsion of electric vehicles (EV) including battery ... -
IEC 61010-2-202
Abstract: Scope: This part of IEC 61010 specifies the safety requirements for electric ACTUATORs and SOLENOIDs, as applied to valves, intended to be installed in an industrial process or discrete control environment. This part of ... -
-
IEC 62608-2
Abstract: Scope: This document specifies the operational model for home network configuration. In the home network, various CE devices that have distinctive functions are connected on a shared network. However, there is no manager ... -
IEC 60404-15
Abstract: Scope: This part of IEC 60404 specifies a solenoid method, a magnetic moment method, a magnetic balance method and a permeability meter method for the determination of the relative magnetic permeability of feebly magnetic ... -
-
IEC 60287-3-1 (REDLINE + STANDARD)
Abstract: Scope: This part of IEC 60287-3 is applicable to the conditions of steady-state operation of cables at all voltages, buried directly in the ground, in ducts, troughs or in steel pipes, both with and without partial drying-out ... -
IEC 61747-30-4
Abstract: Scope: This part of IEC 61747 specifies the standard measurement conditions and measuring methods for determining the optical performance and power consumption of active matrix liquid crystal display modules with dynamic ... -
IEC 61987-11
Abstract: Scope: This part of IEC 61987 provides a characterisation of industrial process measuring equipment (device type dictionary) for integration in the Common Data Dictionary (CDD), and generic structures for operating lists ...