درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 781-800 of 9213
-
IEC 62677-1
Abstract: This document is applicable to heat shrinkable low and medium voltage moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection, electrical conductance, ... -
IEC 61238-1-3
Abstract: This part of IEC 61238 applies to compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV), for example buried cables or cables installed in buildings, ... -
IEC 62481-1-3
Abstract: This part of IEC 62481 specifies guidelines for accessing content in the cloud, that is, outside of the home by devices in the home. These Guidelines focus on the discovery, association, and control of Apps capable of ... -
IEC TS 62257-9-5 (REDLINE + STANDARD)
Abstract: This part of IEC 62257, which is a Technical Specification, applies to stand-alone renewable energy products having the following characteristics: • All components required to provide basic energy services are ... -
IEC 61010-031
Abstract: Probe assemblies included in scope This part of IEC 61010 specifies safety requirements for hand-held and hand-manipulated probe assemblies of the types described below, and their related accessories. These probe assemblies ... -
IEC 60050-692
Abstract: This part of IEC 60050 gives the terminology used when considering the dependability and quality of service of electric power systems. It has the status of a horizontal standard in accordance with IEC Guide 108, Guidelines ... -
IEC 62047-30
Abstract: This part of IEC 62047 specifies measuring methods of electro-mechanical conversion characteristics of piezoelectric thin film used for micro sensors and micro actuators, and its reporting schema to determine the characteristic ... -
IEC 62884-2
Abstract: This part of IEC 62884 specifies the methods for the measurement and evaluation of the phase jitter measurement of piezoelectric, dielectric and electrostatic oscillators, including dielectric resonator oscillators (DROs) ... -
IEC TR 63100
Abstract: This document describes 100-GHz spectrum measurement methods using RoF technologies. It covers the background to measurement over 100 GHz, the configuration of a spectrum analyser, the key technologies, such as mm-wave ... -
IEC TR 62679-5-1
Abstract: This part of IEC 62679, which is a technical report, specifies the legibility in terms of contrast, spatial frequency, and reflection of the screen as a function of the physical parameters of an EPD. This legibility ... -
-
-
IEC 60068-3-5 (REDLINE + STANDARD)
Abstract: This part of IEC 60068 provides a uniform and reproducible method of confirming that temperature test chambers, without load specimens, conform to the requirements specified in climatic test procedures of IEC 60068-2 (all ... -
IEC 62056-8-5
Abstract: This part of IEC 62056 specifies the IEC 62056 DLMS/COSEM communication profile for metering purposes based on the Recommendations ITU-T G.9901: Narrowband orthogonal frequency division multiplexing power line communication ... -
IEC 61347-2-7
Abstract: This part of IEC 61347 specifies particular safety requirements for battery supplied electronic controlgear for maintained and non-maintained emergency lighting purposes. It includes specific requirements for electronic ... -
IEC 61000-6-4 (REDLINE + STANDARD)
Abstract: This part of IEC 61000 for emission requirements applies to electrical and electronic equipment intended for use within the environment existing at industrial (see 3.1.12) locations. This document does not apply to equipment ... -
IEC 62442-2
Abstract: This part of IEC 62442 defines a measurement method of the power losses of electromagnetic controlgear, the total input power and the standby power of electronic controlgear for high intensity discharged lamps (excluding ... -
IEC TS 60695-1-14
Abstract: This part of IEC 60695, which is a technical specification, provides guidance about the levels of power and energy that could cause ignition and fire in a low voltage electrotechnical product. It can be used by Product ... -
IEC 61162-460 (REDLINE + STANDARD)
Abstract: This part of IEC 61162 is an add-on to IEC 61162-450 where higher safety and security standards are needed, for example due to higher exposure to external threats or to improve network integrity. This document provides ... -
IEC CISPR/TR 18-1 (REDLINE + STANDARD)
Abstract: This part of CISPR 18, which is a Technical Report, applies to radio noise from overhead power lines, associated equipment, and high-voltage equipment which may cause interference to radio reception. The scope of this ...