درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 801-820 of 9213
-
IEC 62031
Abstract: This document specifies general and safety requirements for light-emitting diode (LED) modules: • non-integrated LED modules (LEDni modules) and semi-integrated LED modules (LEDsi modules) for operation under constant ... -
IEC 61196-6-2
Abstract: This part of IEC 61196 applies to coaxial communication cables described in IEC 61196-6. It specifies the requirements for 75-4 type CATV drop cables. These cables are used in CATV distribution systems, surveillance and ... -
IEC 61340-4-4
Abstract: This part of IEC 61340 specifies requirements for flexible intermediate bulk containers (FIBC) between 0,25 m3 and 3 m3 in volume, intended for use in hazardous explosive atmospheres. The explosive atmosphere can be created ... -
IEC 61643-31
Abstract: This part of IEC 61643 is applicable to Surge Protective Devices (SPDs), intended for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are designed to be ... -
IEC PAS 61076-3-126
Abstract: This document covers rectangular IP65/IP67 connectors with 5 poles for electric power supply up to 16 A. These connectors consist of fixed and free connectors, either rewirable or nonrewirable (for both portions). It uses ... -
IEC 62386-101
Abstract: This part of IEC 62386 is applicable to system components in a bus system for control by digital signals of electronic lighting equipment which is IEC 61347 (all parts), with the addition of DC supplies NOTE Tests in this ... -
IEC 62271-1
Abstract: This part of IEC 62271 applies to AC switchgear and controlgear designed for indoor and/or outdoor installation and for operation at service frequencies up to and including 60 Hz and having rated voltages above 1 000 V. ... -
IEC 63010-1
Abstract: This part of IEC 63010 applies to cables with insulation and sheaths based on halogen-free thermoplastic compounds for use with small devices and for short connections to desktop electrical appliances where flexibility is ... -
-
IEC 60974-9 (REDLINE + STANDARD)
Abstract: This document is applicable to requirements for installation and instructions for use of equipment for arc welding and allied processes designed in accordance with safety requirements of IEC 60974-1, IEC 60974-6 or equivalent. ... -
-
IEC 62386-222
Abstract: This part of IEC 62386 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This document ... -
IEC 62561-7
Abstract: This part of IEC 62561 specifies the requirements and tests for earthing enhancing compounds producing low resistance of an earth termination system. -
IEC 61937-10
Abstract: This part of IEC 61937 specifies the method for IEC 60958 to convey non-linear PCM bitstreams encoded in accordance with the MPEG-4 audio lossless coding (ALS) format. -
IEC 60331-3
Abstract: This part of IEC 60331 specifies the test method for cables which are required to maintain circuit integrity when tested in a metal enclosure and when subject to fire and mechanical shock under specified conditions. This ... -
IEC 61500
Abstract: This document establishes requirements for data communication which is used in systems performing category A functions in nuclear power plants. It covers also interface requirements for data communication of equipment ... -
IEC 60317-56
Abstract: This part of IEC 60317 specifies the requirements of solderable fully insulated (FIW) zerodefect enamelled round copper wire, class 180, with a single coating based on polyurethane resin, which may be modified providing ... -
IEC 62766-4-1
Abstract: This part of IEC 62766 specifies the protocols, which apply to the following reference point interfaces identified in the architecture described in Annex B of IEC 62766-1:2017. • The UNI interfaces, between the ... -
IEC 60942 (REDLINE + STANDARD)
Abstract: This document specifies the performance requirements for three classes of sound calibrator: class LS (Laboratory Standard), class 1 and class 2. Acceptance limits are smallest for class LS and greatest for class 2 instruments. ... -
IEC 62841-3-12
Abstract: This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable threading machines.