درباره ما
ASME - ASME International: Recent submissions
Now showing items 41-60 of 1083
-
Gages and Mandrels for Wrench Openings
Abstract: This Standard establishes final inspection gage sizes and test mandrel sizes for wrench openings and spark plug wrench openings for inch and metric sizes. This Standard does not cover every available size, only those most ... -
Pliers and Shears
Abstract: This Standard provides performance and safety requirements for pliers suitable for cutting wire; for long-nose, long-reach pliers; for hand shears generally used for cutting sheet metal; for wire-twister pliers, which are ... -
Performance Standard for Air Chain Hoists
Abstract: This Standard establishes performance requirements for air-powered chain hoists for vertical lifting service involving material handling of freely suspended (unguided) loads using load chain of the roller or welded link ... -
Flat Wrenches
Abstract: This Standard provides performance and safety requirements for combination, open end, box, and flare nut wrenches; open end adjustable wrenches, with rack and worm adjustment, generally used on both hexagonal and square ... -
Evolution of Quality Assurance Principles and Requirements in the U.S. Nuclear Industry
Abstract: This Section describes the evolution of nuclear quality assurance from early quality control and inspection requirements for AEC nuclear weapons production and naval reactors programs; to the more comprehensive quality ... -
Guidelines for the Evaluation of Uncertainty of Test Values Associated With the Verification of Dimensional Measuring Instruments to Their Performance Specifications
Abstract: This Standard provides guidelines for evaluating the uncertainty of test values obtained when verifying dimensional measuring instruments1 to an ASME B89 testing protocol. The scope is limited to the case in which the ... -
Hydrogen Piping and Pipelines
Abstract: Paragraph GR-3.9.2 was inadvertently omitted from ASME B31.12-2019, page 48. Pipe may be bent and components may be formed by any hot or cold method that is suitable for the material, the intended service, and the severity ... -
Refrigeration Piping and Heat Transfer Components
Abstract: Rules for this Code Section have been developed considering the needs for applications that include piping and heat transfer components for refrigerants and secondary coolants. This Code prescribes requirements for the ... -
Environmental Effects on Coordinate Measuring Machine Measurements
Abstract: This Technical Report discusses important influences of the environment on dimensional and geometric measurements performed using coordinate measuring machines (CMMs), including influences on both the machine and the ... -
Surface Texture (Surface Roughness, Waviness, and Lay)
Abstract: This Standard is concerned with the geometric irregularities of surfaces. It defines surface texture and its constituents: roughness, waviness, and lay. It also defines parameters for specifying surface texture. The ... -
Glossary of Terms for Mechanical Fasteners
Abstract: This Standard is a summary of mechanical fastener terminology, related characteristics, and manufacture. (a) Fastener. A fastener is a mechanical device designed specifically to hold, join, couple, assemble, or maintain ... -
Hydromassage bathtub systems
Abstract: This Standard specifies general requirements, test methods, and markings for whirlpool and air-jetted bathtubs and suction fittings used in hydromassage bathtub systems that incorporate a bathtub and circulation pump. The ... -
Malleable Iron Threaded Pipe Unions Classes 150, 250, and 300
Abstract: This Standard covers threaded malleable iron unions, Classes 150, 250, and 300. It also contains provisions for using steel for NPS 1∕8 unions. This Standard includes (a) design (b) pressure–temperature ratings (c) ... -
Safety Standard for Pressure Vessels for Human Occupancy
Abstract: Application This Standard applies to all pressure vessels that enclose a human within their pressure boundary while under internal or external pressure exceeding a differential pressure of 2 psi (15 kPa). PVHOs include, ... -
Safety Standard for Pressure Vessels for Human Occupancy: In-Service Guidelines
Abstract: INTRODUCTION AND SCOPE (a) This Standard provides technical requirements and guidelines for the operation and maintenance of PVHOs and PVHO systems that were designed, constructed, tested, and certified in accordance with ... -
Code on Nuclear Air and Gas Treatment
Abstract: This Code provides requirements for the performance, design, fabrication, installation, inspection, acceptance testing, and quality assurance of equipment used in air and gas treatment systems in nuclear facilities. PURPOSE The ... -
Material Placement Systems Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
Abstract: Volume B30.24 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of container cranes used for lifting purposes, in conjunction with equipment described in other ... -
Standard for Verification and Validation in Computational Solid Mechanics
Abstract: Purpose and Scope The purpose of this Standard is to provide the CSM community with a common language, a conceptual framework, and general guidance for implementing the processes of computational model V&V. To this end, ... -
Abbreviations and Acronyms for Use in Product Definition and Related Documents
Abstract: The abbreviations and acronyms, hereinafter referred to as “abbreviations,” listed in this Standard are used on engineering drawings and related documentation. Purpose The intent of this Standard is to allow the use of ... -
Socket Wrenches, Handles, and Attachments
Abstract: This Standard provides performance and safety requirements for socket wrenches (sockets), handles used with these wrenches, nutdrivers, and attachments used with socket wrenches, hereinafter collectively referred to as ...