درباره ما
AIA/NAS NAS4160
PLATING, CADMIUM, ELECTRODEPOSITED, FOR FASTENERS - Rev 1
| contributor author | AIA/NAS - Aerospace Industries Association of America Inc. | |
| date accessioned | 2017-09-04T17:16:54Z | |
| date available | 2017-09-04T17:16:54Z | |
| date copyright | 01/31/2013 | |
| date issued | 2013 | |
| identifier other | CBPRBFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;quein/handle/yse/140335 | |
| description abstract | Purpose. This specification defines the procedures to be followed for the electrodeposited cadmium plating of fasteners, fastening systems and other related hardware primarily as a corrosion protective plating. Classification. The plating shall be of the following types and classes as specified. 1.2.1 Types. Types refer to post plating treatments or lack thereof. Type I – As plated Type II – Supplemental chromate treatment Type III – Supplemental phosphate treatment Classes. Classes refer to the thickness of the cadmium plating (reference 3.4.1). Class 1 – .0005 inches minimum thickness (13 micrometers) Class 2 – .0003 inches minimum thickness (8 micrometers) Class 3 – .0002 inches minimum thickness (5 micrometers) Recommendations for improvement or correction of this specification should be directed to the Aerospace Industries Association.Intended Use: The electrodeposited cadmium platings covered by this standard are intended primarily for use on fasteners and related hardware as corrosion protective platings on ferrous and other non-corrosion resistant basis metals and, secondarily, as a sacrificial barrier between metals which possess incompatible electromotive potentials for galvanic corrosion protection. | |
| language | English | |
| title | AIA/NAS NAS4160 | num |
| title | PLATING, CADMIUM, ELECTRODEPOSITED, FOR FASTENERS - Rev 1 | en |
| type | standard | |
| page | 11 | |
| status | Active | |
| tree | AIA/NAS - Aerospace Industries Association of America Inc.:;2013 | |
| contenttype | fulltext |
