درباره ما
MIL-DTL-15090E INT AMD 1
ENAMEL, EQUIPMENT, LIGHT GRAY (NAVY FORMULA NO. 111)
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T18:08:15Z | |
| date available | 2017-09-04T18:08:15Z | |
| date copyright | 09/10/2013 | |
| date issued | 2013 | |
| identifier other | GRIGGFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;quein=auth/handle/yse/191234 | |
| description abstract | This specification covers enamel that has been formulated to comply with air pollution regulations which allow a maximum volatile organic compound (VOC) content of 250 grams of solvent minus water per liter of paint (2.08 lb/gal) as delivered. The paint is a light-gray equipment enamel (Navy Formula no. 111) for shipboard use as a topcoat on equipment, machinery, furniture, and electrical equipment such as switchboards. The light-gray equipment enamel covered by this specification is an air-drying, solvent-based coating for use in all interior dry areas including applications covered by reactor plant painting schedules. This product is supplied in a single can and is used as supplied without thinning.Intended Use: The enamel covered by this specification is intended for use as a finish or topcoat on equipment, machinery, furniture and electrical equipment in marine service where fire-retardancy is not required. This product may be applied where air pollution regulations apply. This enamel is a non-lead, non-chromate, nonasbestos material. The dried paint film has been tested to U.S. EPA standards and the paint debris is, as of the time of this specification, a non-hazardous waste. It may be applied by brush or spray and is suitable for any metal or wood structure. During development, this enamel was easily sprayed with a Binks #7 HTES (high transfer efficiency special) gun. Spraying with a high volume, low pressure (HVLP) gun was successful using an AIRVERTER® HVLP Sprayer available from Smith Eastern Corporation. The basic formulation provides an enamel of a gray color. This enamel has been formulated to comply with air pollution regulations which allow a maximum VOC of 250 grams of solvent minus water per liter of paint (2.08 lb/gal) as delivered, and does not require thinning for brush, roller, or spray application. | |
| language | English | |
| title | MIL-DTL-15090E INT AMD 1 | num |
| title | ENAMEL, EQUIPMENT, LIGHT GRAY (NAVY FORMULA NO. 111) | en |
| type | standard | |
| page | 20 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013 | |
| contenttype | fulltext |
