درباره ما
ASME - ASME International: Recent submissions
Now showing items 461-480 of 1083
-
ASME B16.51
Abstract: This Standard establishes requirements for cast copper alloy, wrought copper, and wrought copper alloy, pressconnect pressure fittings for use with hard drawn seamless copper water tube conforming to ASTM B88 for piping ... -
ASME B107.100
Abstract: This Standard provides performance and safety requirements for combination wrenches. Except where indicated, these requirements also apply to wrenches described in B107.9, Box Wrenches, Double Head; B107.39, Open End ... -
ASME B30.1
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement related equipment. For the ... -
ASME B18.22M
Abstract: This Standard covers general specification and dimensions for flat, round hole washers, both soft (as fabricated) and hardened, intended for use in general purpose applications.
The inclusion of dimensional data in this ... -
ASME B89.7.2
Abstract: Objective
The objective of this Standard is to ensure correctness and acceptability of dimensional measurements.
Requirements
This Standard specifies requirements for preparation ... -
ASME PTC 19.2
Abstract: The methods for pressure measurement and the protocols used for data transmission are provided in this Supplement. Guidance is given for setting up the instrumentation and determining the uncertainty of the measurement. ... -
ASME B18.29.2M
Abstract: This Standard delineates the dimensional, mechanical, and performance data for the metric series helical coil screw thread insert and threaded hole into which it is installed. Appendices that describe insert selection, STI ... -
ASME B30.28
Abstract: SCOPE EXCLUSIONS
Any exclusion of, or limitations applicable to the equipment, requirements, recommendations, or operations contained in this Standard are established in the affected volume’s ... -
ASME A18.1
Abstract: Equipment Covered by This Standard.
This safety Standard covers the design, construction, installation, operation, inspection, testing, maintenance, and repair of inclined stairway chairlifts and ... -
ASME B30.18
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-handling related equipment. For the ... -
ASME N511
Abstract: This Standard covers the requirements for in-service testing of nuclear safety-related air treatment, heating, ventilating, and air-conditioning systems in nuclear facilities.
Purpose
The purpose ... -
ASME Y32.7
Abstract: FOREWORD
(This foreword is not a part of American National Standard Graphic Symbols for Railroad Maps and Profiles Y32.7-1972)
This standard supersedes American National Standard Graphical Symbols ... -
ASME MFC-22
Abstract: This Standard describes the criteria for the application of a turbine flowmeter with a rotating blade for the measurement of liquid flows through closed conduit running full.
The standard discusses the following: ... -
ASME B31G
Abstract: This document is intended solely for the purpose of providing guidance in the evaluation of metal loss in pressurized pipelines and piping systems. It is applicable to all pipelines and piping systems within the scope of ... -
ASME B73.3
Abstract: This Standard covers sealless centrifugal pumps of horizontal end suction single stage and centerline discharge design. This Standard includes dimensional interchangeability requirements and certain design features to ... -
ASME B89.1.2M
Abstract: This Standard covers procedures to establish unified practice in calibration laboratories for measuring gage blocks up to 20 in. (500 mm) in length (size) by contact comparison methods. It does not cover interferometric ... -
ASME PTC 42
Abstract: This Code specifies the methods, procedures, and instrumentation for the field testing and reporting of WT performance. These procedures and practices were specifically compiled for WTs of 100 kW or more, but are applicable ... -
ASME MFC-9M
Abstract: Scope and Field of Application
This Standard specifies a method of liquid flow rate measurement in closed conduits by measuring the mass of liquid delivered into a weighing tank in a known time interval. It deals ... -
ASME A112.20.2
Abstract: This Standard establishes minimum requirements, identified by industry consensus, for the training and qualification of installers of firestop systems and devices for piping systems.
The qualifications under this ... -
ASME Y14.8
Abstract: This Standard covers defi nitions of terms and features unique to casting, forging, and molded part technologies with recommendations for their uniform specifi cation on engineering drawings and related documents. Unless ...