AWS - American Welding Society: Recent submissions
Now showing items 301-320 of 451
-
AWS PRGHF
Abstract: Introduction
Hardfacing is one category from the family of surfacing processes. Surfacing is defined in AWS A3.0, Standard Welding Terms and Definitions, as “The application by welding, ... -
AWS B2.1-1-208
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS A5.14/A5.14M
Abstract: This specification prescribes requirements for the classification of bare nickel and nickel-alloy welding electrodes, strip electrodes, and welding rods. It includes those compositions where the nickel content exceeds that ... -
AWS D8.8M
Abstract: This specification describes weld geometry and workmanship criteria essential to ensure the quality of automotive and light truck weldments. This specification covers the arc and hybrid arc welding of coated and uncoated steels. -
AWS D14.1/D14.1M
Abstract: Scope:
This specification applies to the welding of all principal structural weldments and all primary welds used in the manufacture of cranes for industrial, mill, power house, ...Subject(s) : Cranes , industrial cranes , lifting devices , material handling equipment , mill cranes , -
AWS D10.18M/D10.18
Abstract: This standard provides a summary of recommended industrial practices for welding piping1 fabricated from aluminum alloys. Joint design, welding current, and shielding gas tables are included. This standard makes ... -
AWS PWE
Abstract: Preface
When we, the authors, decided to write this book, we had a definite aim in mind To present a “practical” approach to the application of welding theories.
Over recent years ... -
AWS B2.1/B2.1M-BMG
Abstract: This publication is an extract of AWS B2.1/B2.1M:2009-ADD1, Specification for Welding Procedure and Performance Qualification, and is identical to Annex D, Base Metal Grouping, in the 2009 Addenda edition of that ... -
AWS B2.1-1-026
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...Subject(s) : allowable joint designs , base metal , carbon steel , filler metal , manual shielded metal arc welding , Welding Procedure Specification , -
AWS EWH-I
Abstract: Foreword
This index was prepared for the Safety and Health Committee of the American Welding Society to provide key-word search capability for the series Effects of Welding on Health, Volumes ... -
AWS B4.0
Abstract: This specification establishes standard methods for mechanical testing of welds. The significance of each test, test apparatus, preparation of the test specimens, and the test procedure are described. Example test results ... -
AWS C2.23M/C2.23
Abstract: General.
This standard is a procedure for the application of metallic Thermal Spray Coating (TSCs) of aluminum, zinc, and their alloys and composites for the corrosion protection of steel. Required ...Subject(s) : Aluminum , aluminum metal matrix composite , arc spray , flame spray , steel protection , thermal spray coating , zinc , zinc/aluminum alloy , -
AWS A5.11/A5.11M
Abstract: This specification prescribes requirements for the classification of nickel and nickel-alloy covered electrodes for shielded metal arc welding. It includes those compositions in which the nickel content generally exceeds ... -
AWS QC7
Abstract: Program.
The rules for the American Welding Society (AWS) Certified Welder Program and the requirements for maintenance of certification are provided in this standard. This standard requires the use of ...Subject(s) : AWS certified welders , welder certification , welder qualification , welders , -
AWS API-M
Abstract: GENERAL
API 1104 provides a list of permitted welding processes, and does not allow for substitutions without formal consideration by the API 1104 Committee.
The following list, in the same order ... -
AWS D11.2
Abstract: The term cast iron encompasses a family of ferrous alloys with a variety of metallurgical, mechanical, and physical properties. The chemical composition and welding requirements of the metals vary within the family. ... -
AWS PRG
Abstract: Three classes of radiographic quality are offered for possible application to welds in general fabrication. Normally, the choice of an appropriate quality level is made by the engineer, the user or may be contained in the ... -
AWS D8.14M
Abstract: The purpose of this specification is to provide the minimum acceptance criteria for arc welding of various types of structural automotive parts made of aluminum for passenger cars, light trucks, and other types of vehicles. ... -
AWS C5.5/C5.5M
Abstract: This document presents recommended practices for the gas tungsten arc welding (GTAW) process.(Footnote 1) Its purpose is to provide a fundamental explanation of the process, describe basic practices and concepts, and outline ...Subject(s) : equipment , Gas tungsten arc welding , GTAW , Heliarc® , process , qualification , quality , safe practices , TIG , training , WIG ,