درباره ما
AWS - American Welding Society: Recent submissions
Now showing items 361-380 of 451
-
AWS D1.7/D1.7M
Abstract: This document contains basic information pertinent to the welded strengthening and repair of existing steel structures. The information contained in this guide is intended for both Engineers and Contractors with the purpose ... -
AWS C2.21M/C2.21
Abstract: General.
The acceptance inspection is part of a quality assurance program to provide test results to purchasers with that show that the thermal spray equipment operates according to the manufacturer’s ...Subject(s) : acceptance inspection , flame arc , HVOF , plasma , thermal spray equipment , -
AWS B2.3/B2.3M
Abstract: This specification provides the requirements for qualification of soldering procedure specifications. This specification also provides requirements for the performance qualification of solderers and soldering operators and ... -
AWS C5.1
Abstract: These recommended practices present a description of the plasma-arc welding process and practical procedures as applied to joining parts and surfacing. These discussions apply to a wide variety of metals and represent ... -
AWS WHC1.07
Abstract: The types of residual stress that occur in welds and their respective distribution patterns are quite complex. This chapter presents an analysis of stress in single- and multiple-pass welds and examines the various factors ... -
AWS A5.26/A5.26M
Abstract: This specification prescribes requirements for the classification of carbon and low-alloy steel electrodes for electrogas welding. It covers solid and composite (flux cored and metal cored) electrodes used with external ...Subject(s) : carbon steel electrodes , electrogas welding electrodes , Filler metal specifications , flux cored electrodes , low-alloy steel electrodes , welding electrodes , -
AWS B2.1-1-002
Abstract: Foreword
This foreword is not a part of ANSI/AWS B2.1-1-002 (R2006), Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through ... -
AWS A5.12M/A5.12
Abstract: This specification prescribes the requirements for the classification of bare tungsten and tungsten-alloy electrodes for gas tungsten arc welding and cutting and plasma arc welding and cutting.Subject(s) : gas tungsten arc cutting electrodes , gas tungsten arc welding electrodes , plasma arc cutting electrodes , plasma arc welding electrodes , Tungsten-alloy electrodes , -
AWS WHC1.04
Abstract: INTRODUCTION
The various metallurgical phenomena involved in welding—melting, freezing, diffusion, precipitation, solid-state transformations, thermal strains, and shrinkage stresses—can ... -
AWS A5.6/A5.6M
Abstract: This specification prescribes requirements for the classification of covered copper and copper-alloy electrodes for shielded metal arc welding. It includes compositions in which the copper content exceeds that of any other ... -
AWS B2.1-1-016
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...Subject(s) : allowable joint designs , base metal , carbon steel , filler metal , manual shielded metal arc welding , Welding Procedure Specification , -
AWS A5.01M/A5.01
Abstract: This standard identifies various information necessary for communication between a purchaser and a supplier of welding consumables. This standard, together with an AWS, ISO, or other recognized welding consumable standard, ... -
AWS C3.6M/C3.6
Abstract: This specification presents the minimum fabrication and quality requirements for the furnace brazing of materials such as steels, stainless steels, nickel, nickel alloys, copper, copper alloys, and heat- or corrosion-resistant ... -
AWS B2.1-1-203
Abstract: Abstract
This standard contains the essential welding variables for carbn steel in the thickness range of 1/8 through 3/4 inch, using manuai shielded metal arc welding with E6010 (vertical uphill). It ... -
AWS QC1
Abstract: This standard establishes the requirements for AWS certification of welding inspection personnel. It describes how personnel are certified, and the principles of conduct and practice by which certification may be maintained. ...