JSA - Japanese Standards Association: Recent submissions

Now showing items 81-100 of 2957

    • JSA JIS A 6202 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: There is no abstract information for this document.

    • JSA JIS G 4904 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies seamless nickel-chromium -iron alloy tubes (hereafter referred to as tubes) to be used, for example for heat exchangers or condensers in chemical and petroleum industries, and ...

    • JSA JIS K 6761 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the polyethylene pipes for general purpose to be used mainly for the conveyance of water not containing chlorine (hereafter referred to as pipes). NOTE: The International Standards corresponding to ...

    • JSA JIS D 9452 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies requirements for the reflex reflectors to be used for bicycles specified in JIS D 9111. NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are ...

    • JSA JIS L 1903 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies testing methods for feathers intended for filled manufactured articles.

    • JSA JIS H 0544 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the flammability test method for cast and wrought products manufactured from magnesium alloys.

    • JSA JIS K 6265 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the determination methods of the temperature rise, dynamic creep and compression set due to internal heat generation, and the fatigue life of vulcanized rubber and thermoplastic rubber using the ...

    • JSA JIS G 3458 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the alloy steel pipes (hereafter referred to as pipes) mainly used for piping at elevated temperatures. This Standard is generally applicable to pipes of outside diameter 10.5 mm (nominal diameter ...

    • JSA JIS Z 3316 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies solid rods and wires (hereafter generically referred to as filler metals) used for TIG welding of mild steel, high strength steel with a tensile strength in the range of 490 MPa to 830 MPa, and low ...

    • JSA JIS Z 2343-3 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard describes three types of reference blocks to be used for JIS Z 2343-1 and JIS Z 2343-2: Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant ...

    • JSA JIS B 7525-2 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies requirements for pressure resistant hydrometers that are graduated to indicate density of liquefied petroleum gases (hereafter referred to as the hydrometers) . Hydrometers used for transactions or ...

    • JSA JIS G 3117 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the rerolled steel bars 1) manufactured by hot-rolling, that are intended for concrete reinforcement. Rerolled steel bars specified in this Standard are either plain steel bars ...

    • JSA JIS G 3129 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies requirements for hot-rolled steel products used mainly for transmission steel towers (hereafter referred to as steel products).

    • JSA JIS Z 3334 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies rods, solid wires and strip electrodes of nickel and nickelalloy (hereafter generically referred to as filler metals) used for TIG welding, MIG welding, submerged arc welding, overlay welding with ...

    • JSA JIS G 3141 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies cold-reduced carbon steel sheet (hereafter referred to as steel sheet) and cold-reduced carbon steel strip (hereafter referred to as steel strip) of not less than 30 mm in width. The cold-rolled ...

    • JSA JIS Z 1604 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies inserted flange-type closure systems used for steel drums. NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows. ISO 15750-3: ...

    • JSA JIS R 7222 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies test methods for evaluating the physical properties of graphite materials (hereafter referred to as materials) excluding brush materials for electrical machines.

    • JSA JIS D 9420 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies requirements for the spokes and nipples to be used mainly for bicycles for general use, bicycles for young children, and electric power assisted cycles specified in JIS D 9111.

    • JSA JIS B 7503 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the design specification (design characteristics) and performance (metrological characteristics) of mechanical dial gauges with scale intervals of 0.01 mm, 0.005 mm, 0.002 mm and 0.001 mm. NOTE: The ...

    • JSA JIS A 9504 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the man-made mineral fibre thermal insulation materials (hereafter referred to as thermal insulation materials) used for the hot insulation or cold insulation of the equipment ...