درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 321-340 of 2147
-
MS9948
Abstract: This military standard is approved by the Department of Defense and is mandatory on all activities. Selection for all new engineering and design applications and for repetitive use shall be made from this document. ... -
MIL-H-81019D
Abstract: This specification covers the requirements for a petroleum base hydraulic fluid for use in aircraft, missile and ordnance hydraulic systems in the −70° to +100°C temperature range. Intended Use: ... -
A-A-59297
Abstract: This commercial item description covers buffing and polishing compounds used for metal finishing. -
MIL-PRF-81975C (1)
Abstract: This specification covers regulated, refueling couplings for use by tanker aircraft for refueling other aircraft using the probe and drogue method of aerial refueling.Intended Use: The aerial refueling couplings ...Subject(s) : Probe , -
MIL-I-81969/6B
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the tool described herein shall consist of this document and the latest issue ... -
MIL-B-81793/29
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-L-85490
Abstract: This specification establishes the requirements for rocket motor case liner material. Intended Use: The intended use of the material described herein is as liner or insulation for rocket motor cases. -
MIL-S-22999/2A
Abstract: This specification is approved for use within the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MS14187 VALID NOTICE 1
Abstract: NOTICE OF VALIDATION
MS14187(AS), dated 21 July 1978, has been reviewed and determined to be valid for use in acquisition. -
MIL-W-8982/4
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the ratcheting box wrenches described herein shall consist of this document ... -
QPL-85582-QPD
Abstract: QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-85582 Primer Coatings: Epoxy, Waterborne
This QPL has been prepared for use by or for the Government in the acquisition of products ... -
MS14134 REV C
Abstract: This military standard is approved by NAVAL AIR SYSTEMS COMMAND, Department of the Navy and shall be used by that activity. All other military activities are required to employ this standard where suitable. -
MIL-DTL-6363/12A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-6363. ... -
A-A-50423
Abstract: This description covers an assembly that dispenses a pressurized solvent (isopropyl alcohol) for used in cleaning electrical components on aircraft. -
MIL-P-85459
Abstract: This specification establishes the requirements for manufacture and acceptance of two types of probes, referred to herein as the probe.
Probes covered by this specification consist of the following types:
Type ... -
MIL-PRF-83282D
Abstract: This specification covers the requirements for a synthetic hydrocarbon-base hydraulic fluid for use in the temperature range of −40° to +205°C. This hydraulic fluid is identified by NATO Code Number H-537 ...Subject(s) : Hydraulic control systems , Polyalphaolefin , -
A-A-59298B
Abstract: This commercial item description (CID) covers the requirements for one type of pressure-sensitive tape to use as a separator to prevent galvanic attack between dissimilar metals.