درباره ما
AWS - American Welding Society: Recent submissions
Now showing items 381-400 of 451
-
AWS CM
Abstract: Preface
In 1976, the American Welding Society (AWS) introduced a much-needed certification program, specifically for those individuals who perform visual welding inspection. Shortly thereafter, the AWS ... -
AWS C1.5
Abstract: This specification establishes qualification requirements for a resistance welding technician. It describes how qualifications are determined, and the practice by which qualification may be attained and maintained. The ...Subject(s) : Qualification , Resistance Welding Technician , -
AWS B2.1-5A-222
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) were derived from the above-listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research ... -
AWS F1.2
Abstract: This method describes a laboratory device and procedure for obtaining representative fume samples and determining fume generation rates of welding and allied processes.
A separate collection procedure for determining ... -
AWS D17.1/D17.1M
Abstract: This specification contains requirements for fusion welding of aerospace hardware. It is to be used in conjunction with the Engineering Authority's design handbooks or their accepted data. When conformance to this specification ... -
AWS A3.0M/A3.0
Abstract: The purpose of this document is to establish standard terms and definitions to aid in the communication of information related to welding, adhesive bonding, brazing, soldering, thermal cutting, and thermal spraying. The ... -
AWS C4.2/C4.2M
Abstract: This standard describes the equipment, procedures and safe practices for the oxyfuel cutting of steel. It is for the operators of both hand and machine torches and is recommended for management personnel associated with ... -
AWS B2.1-1-021
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...Subject(s) : allowable joint designs , base metal , carbon steel , filler metal , manual gas tungsten arc welding , manual shielded metal arc welding , Welding Procedure Specification , -
AWS A5.8M/A5.8
Abstract: This specification prescribes requirements for the classification of brazing filler metals for brazing and braze welding. It includes brazing filler metals for brazing with or without a flux and in all protective atmospheres ... -
AWS D16.2M/D16.2
Abstract: This document applies to the recommended design, integration, installation, and use of industrial welding robotic and automatic systems. This document is intended for the gas metal arc welding (GMAW) and flux cored arc ... -
AWS C3.11M/C3.11
Abstract: This specification presents the minimum process and quality requirements for the torch soldering of ceramics, precious metals, and refractory metals, as well as the alloys of copper (Cu), iron (Fe), nickel (Ni), aluminum ... -
AWS B2.1-8-214
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS WHC1.06
Abstract: INTRODUCTION
All types of welded structures—from steel bridges to jet components—serve a function. Likewise, the welded joints in these structures and components are designed for service-related ... -
AWS B5.1
Abstract: Requirements. This standard establishes the requirements for qualification and defines the body of knowledge applicable to welding inspection personnel.
Levels. There are three ... -
AWS PRGT
Abstract: Introduction
Titanium need not be ail that hard to weld! In industrial sectors the common opinion is that titanium alloys are difficult to weld. While it is true that titanium alloys can be ... -
AWS B2.1-1-206
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS PHB-6
Abstract: Introduction
This publication is not to be considered as a substitute for the D1.1 code book. Rather, the Handbook is provided as a supplemental aid for the “deckplate” inspector. Only the ... -
AWS EWH-1
Abstract: Preface
This literature review has been prepared for the Safety and Health Committee of the American Welding Society to provide an assessment of current knowledge of the effects of welding on health, ... -
AWS C7.1M/C7.1
Abstract: These recommended practices present descriptions of electron beam welding equipment and procedures for welding a wide range of metals and thicknesses; allied processes, to include electron beam braze welding (EBBW), cutting, ...