GSA - 3FNE - Engineering Division (Furniture Center)

KKK-T-001985

Sat, 01 Jan 1977 00:00:00 GMT

KKK-T-001985; TRUCKS, LIGHT COMMERCIAL, ELECTRIC POWERED, FRONT OR REAR WHEEL DRIVEN (4X2, 500 TO 3000 POUNDS MINIMUM PAYLOAD) GSA - 3FNE - Engineering Division (Furniture Center) This specification covers new commercially produced electrically propelled, four-wheeled, two front or rear wheel driven (4×2) light trucks, in the 1/4 to 1-1/2 ton payload range. All vehicles covered by this specification must meet all applicable Federal Motor Vehicle Safety Standards (FMVSS) and Federal Motor Carrier Safety Regulations (FMCSR). Vehicles procured under this specification shall be warranted by the manufacturer or contractor as specified in Section 6.4.
This specification shall be used for the purchase of electric vehicles to be used by Federal agencies. These vehicles can be used in lieu of conventional gasoline or diesel powered vehicles in specialized utilitarian applications (see 6.1). Due to the limited performance, range, and capacity of electric vehicles, the intended use of these vehicles range from in-plant-on-facility administrative use at low speeds for transport of mail, small parcels, maintenance and administrative personnel to on-road transport of larger quantities of mail, cargo, supplies, equipment, personnel, and routine security patrols.
Requisitions for these vehicle(s) and their equipment should be submitted in accordance with the ordering data (see 6.2) of this specification. These requisitions shall be accompanied by a description setting forth the intended use of the vehicle, and the operating conditions as mentioned in the boxed cautionary note above. These shall be submitted to the General Services Administration, National Automotive Center (FY), Washington, DC 20406.
The classification of vehicle(s) shall be by type and class. The dimensional characteristics and the basic minimum requirements for each type are shown in Table I (page 4). Vehicle "types" are determined by the body configurations, and the vehicle class is determined by payload.
The class of vehicle shall be determined by the minimum payload capacity (see 3.6.2 Payload) required for each type of vehicle specified as follows.

  Class   Minimum payload (pounds)     A                 500     B               1,000     C               1,500     D               2,000     E               3,000

The vehicles complying with the classified method (see 1.2 and Table I) of this specification are defined as standard electric vehicles for purposes of Government procurement.
Intended Use: The vehicles covered by this specification are intended for general administrative use by the Government in transporting personnel or cargo. Principal use of these vehicles will be for maintenance, parcel and/or mail delivery, messenger service, and routine security patrol. These vehicles are designed for on facility use, and stop and go low speed urban/suburban applications. (See the boxed note on Page 1 and Paragraph 1.1.1). Federal specifications do not include all varieties of the commodity as indicated by the title of the specification, or which are commercially available, but are intended to cover only those generally used by the Federal Government. Detailed descriptions, refinements, and deviations of each vehicle type are defined within this specification but may be modified in the invitation for bids or contractual requirement. Due to the variety of truck models covered in the specification, purchasers should be aware that many equipment and accessory items described herein are not necessarily compatible or available on all vehicles. It should be ascertained before specifying (ordering) that vehicle manufacturers offer such equipment, devices, or options. (Reference manufacturer's data books and brochures). The parameters for Government agencies to purchase these vehicles are covered in the Federal Property Management Regulations (FPMR).

AA-V-2737 (2)

Sun, 01 Jan 2006 00:00:00 GMT

AA-V-2737 (2); MODULAR VAULT SYSTEMS GSA - 3FNE - Engineering Division (Furniture Center)

QPL-AA-F-363-18

Sun, 01 Jan 2012 00:00:00 GMT

QPL-AA-F-363-18; FILING CABINET, SECURITY, MAPS AND PLANS, GENERAL FILING AND STORAGE GSA - 3FNE - Engineering Division (Furniture Center)

QPL-FF-L-2740-9

Fri, 01 Jan 2010 00:00:00 GMT

QPL-FF-L-2740-9; LOCKS, COMBINATION GSA - 3FNE - Engineering Division (Furniture Center) FEDERAL QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER FEDERAL SPECIFICATION FF-L-2740 LOCKS, COMBINATION
The General Services Administration authorized this list to identify products eligible for consideration in Federal Government procurement under the subject specification. The Government has qualified each product as meeting applicable requirements under the latest effective issue of the subject specification and has identified the source of each qualified by the name, address, and plant location of the manufacturer. The listing of a product is not an endorsement by the Federal Government and does not release the supplier from compliance with specification requirements. The Government will revise, amend, or cancel this list as necessary, without prior notice, to reflect actions by the Government or the manufacturer requiring modification or discontinuance of any or all of the information herein. The brand name designation under which the product is offered for sale to the general public is capitalized and enclosed in quotation marks in the Manufacturer's Designation or "BRAND NAME" column, provided the manufacturer or his authorized distributor has certified that the product submitted for qualification is the same product, except for packaging and marking, and is the only product available on the public market by that brand name. This information may be referred to for advertising or publicity only to state that the product or a particular manufacturing facility is listed and identified here, or that such product meets the requirements of the subject specification, provided that test results are publicly available to verify the statement, and provide further that such advertising or publicity does not claim or imply Government preference or endorsement or that the product is the only one of its type that has passed the prescribed tests.
The activity responsible for this Qualified Products List is the General Services Administration, Federal Acquisition Service, Integrated Workplace Acquisition Center (3QSA), Washington, DC 20406.