درباره ما
ASME - ASME International: Recent submissions
Now showing items 221-240 of 1083
-
ASME B16.21
Abstract: Scope: This Standard covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets. These gaskets are dimensionally suitable for use with flanges described in the referenced flange standards. -
ASME B16.3
Abstract: Scope: This Standard covers malleable iron threaded fittings, Classes 150 and 300. It also contains provisions for using steel for caps and couplings in Class 150 for NPS 3⁄8 and smaller. This Standard includes (a) ... -
ASME STP-PT-085
Abstract: Scope: BACKGROUND AND INTRODUCTION Steel piping, valves, blow-out preventers (BOPs), and other processing components require protection from contact with hydrogen sulfide-laden oil or gas. These “sour” products ... -
ASME Y14.5.2
Abstract: Scope: This Standard establishes certification requirements for a geometric dimensioning and tolerancing professional (GDTP). Certification shall be based on either ASME Y14.5M-1994 or ASME Y14.5-2009, its appendices, and ... -
ASME B31.8
Abstract: Scope: (a) This Code covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. This Code also covers safety aspects of the operation and maintenance ... -
ASME A17.8
Abstract: Scope: ASME A17.8/CSA B44.8 applies to elevators permanently installed in a wind turbine tower to provide vertical transportation of authorized personnel and their tools and equipment only. Such elevators are typically ... -
-
ASME STP-PT-081
Abstract: Scope: INTRODUCTION AND DESCRIPTION OF THE PROBLEM Cyclic stress-strain curves describe the stress-strain behavior under cyclic loads. Usually, the cyclic stress amplitude Δσ/2 is plotted as a function of the ... -
ASME MFC-7
Abstract: Scope: SCOPE AND FIELD OF APPLICATION This Standard applies only to the steady flow of single-phase gases through critical flow venturis (CFV) of shapes specified herein [also sometimes referred to as critical flow nozzles ... -
ASME B31Q
Abstract: Scope: This Standard establishes the requirements for developing and implementing an effective Pipeline Personnel Qualification Program (qualification program) utilizing a combination of technically based data, accepted ... -
ASME B5.62M
Abstract: Scope: This Standard covers basic toolholder shanks with a hollow 1/9.98 taper, and simultaneous contact face and taper mating surfaces that are applicable to a range of machine tool applications. Hollow taper shank (HSK ... -
ASME B16.47
Abstract: Scope: General This Standard covers pressure–temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60. Included are flanges with rating class ... -
ASME STP-PT-082
Abstract: Scope: INTRODUCTION ASME ST-LLC request-for-proposal RFP-16-03 (project STIN-0151) sought the calculation of stress intensity K factors for external surface cracks in thick-walled cylinder vessels. The 1040 crack analysis ... -
ASME B30.23
Abstract: Scope: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement related equipment. For ... -
ASME STP-PT-077
Abstract: Scope: FOREWORD This publication was prepared by ASME ST-LLC and sponsored by ASME and EPRI. The project was conducted by EPRI under a cost-sharing agreement with ASME ST-LLC. Longitudinal seam-welded, high-temperature ... -
ASME PVHO-1
Abstract: Scope: Application This Standard applies to all pressure vessels that enclose a human within their pressure boundary while under internal or external pressure exceeding a differential pressure of 2 psi (15 kPa). PVHOs ... -
ASME B30.7
Abstract: Scope: The B30.7 Volume includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of winches arranged for mounting on a foundation or other supporting structure for ... -
ASME STS-1
Abstract: Scope: Mechanical design includes sizing of the gas passage, both in diameter and height, and the drop in gas temperature as heat is transferred through the stack wall. Methods for calculating draft, draft losses, and heat ... -
-
ASME B73.2
Abstract: Scope: This Standard is a design and specification standard that covers metallic centrifugal pumps of vertical shaft single-stage design with suction and discharge nozzles in-line. This Standard includes dimensional ...