CSA/AM ANSI Z21.35-2005/CSA 6.8-2005

Abstract

This standard applies to newly produced pilot gas filters, hereinafter referred to as filters (See Part IV, Definitions), constructed entirely of new, unused parts and materials. <br>Compliance of a filter with this standard does not imply that the filter is acceptable for use on gas appliances without supplemental tests with the filter applied to the particular appliance design. <br>This standard applies to filters having maximum operating gas pressure ratings of &#189; psi. <br>Filters complying with the provisions of this standard shall be considered as having an operating temperature range of 32&#176;F to 125&#176;F (0&#176;C to 51.5&#176;C). They may be capable of operation at a higher temperature, lower temperature, or both, when so specified by the manufacturer. <br>If a value for measurement as given in this standard is followed by an equivalent value in other units, the first stated value is to be regarded as the specification. <br>All references to psi throughout this standard are to be considered gage pressures unless otherwise specified. <br>Exhibit A contains provisions that are unique to Canada. <br>Exhibit B contains a list of standards specifically referenced in this standard, and sources from which they may be obtained.