درباره ما
AWS - American Welding Society: Recent submissions
Now showing items 341-360 of 451
-
AWS B2.1-8-023
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...Subject(s) : allowable joint designs , austenitic stainless steel , base metal , filler metal , manual shielded metal arc welding , Welding Procedure Specification , -
AWS QC7 SUPP G
Abstract: Program.
The rules for the American Welding Society (AWS) Certified Welder Program and the requirements for maintenance of certification are provided in this standard. This standard requires the use of ...Subject(s) : AWS certified welders , welder certification , welder qualification , welders , -
AWS D3.7
Abstract: This standard makes sole use of U.S. Customary Units. Approximate mathematical equivalents in the International System of Units (SI) are provided for comparison in parentheses or in appropriate columns in tables and ...Subject(s) : Aluminum hull welding , aluminum hulls , boats , crafts , hull welding , ship welding , ships , -
AWS B2.1-8-215
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS EWH-11
Abstract: Introduction
The health of workers in the welding environment is a major concern of the American Welding Society. To stay abreast of this subject, the health literature is periodically reviewed and ...Subject(s) : cancer , disease , exposure , fumes , gases , health , literature review , metal fume fever , noise , radiation , toxicology , Welding , -
AWS C4.3/C4.3M
Abstract: This manual describes the equipment, procedures, and safe practices for oxyfuel gas heating torch operation. It is written for the operators of torches using single or multiple heating tips and heads. It is also recommended ... -
AWS A5.23/A5.23M
Abstract: This specification prescribes requirements for the classification of carbon steel and low-alloy steel electrodes (both solid and composite) and fluxes for submerged arc welding. Multiple pass flux–electrode classifications ... -
AWS WHB-1.9
Abstract: PREFACE
Welding Science and Technology is Volume 1 of the ninth edition of the American Welding Society’s Welding Handbook series. This volume presents an overview of the most ... -
AWS B2.1-1-207
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS A5.2/A5.2M
Abstract: This specification prescribes requirements for the classification of carbon and low-alloy steel rods for oxyfuel gas welding.
Safety and health issues and concerns are beyond the scope of this standard and, therefore, ... -
AWS EG3.0
Abstract: This guide establishes a minimum skill standard defining training and qualification requirements that are necessary for Participating Organizations to develop and administer a Level II - Advanced Welder Program in accordance ... -
AWS B5.17
Abstract: This specification establishes the minimum requirements for the Welding Quality Program for welding fabricators. This specification is intended to be used by welding fabricators regardless of the welding processes or ... -
AWS A5.3/A5.3M
Abstract: This specification prescribes requirements for the classification of aluminum and aluminum-alloy electrodes for shielded metal arc welding. -
AWS B2.1-1-027
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS B5.15
Abstract: General. This specification establishes the requirements for qualification of radiographic interpreters. It describes how these personnel shall be qualified, establishes training requirements, defines ... -
AWS A5.5/A5.5M
Abstract: This specification prescribes requirements for the classification of low-alloy steel electrodes for shielded metal arc welding of carbon and low-alloy steels. These electrodes include steel alloys in which no single alloying ...