درباره ما
ARMY - AV - Aviation and Missile Command
Browse by
Recent Submissions
-
MIL-P-236J
Abstract: This specification covers flanged and notched galvanized steel, and aluminum alloy nestable culvert pipe in diameters of 8-inches through 84-inches. Intended Use: The culvert pipe is intended for use in the ...Subject(s) : Corrugated culvert pipe , Corrugated pipe , Sewer pipe , -
ADS-69-PRF
Abstract: This Aeronautic Design Standard (ADS) describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54° C to +135° C temperature range (see 6.1). This fluid is ...Subject(s) : additive , anti-wear , bulk modulus , corrosive , flash point , isothermal secant bulk modulus , lubricant , oxidation , pour point , shear stability , viscosity , -
MIL-P-52384A
Abstract: This specification covers repair material for pneumatic floats and boats.Subject(s) : Inflatable , pneumatic boats , Neoprene , Pneumatics , Rubber coated fabric , -
GG-C-550B
Abstract: This specification covers one type of drop-spring-bow drafting compass with pen and pencil attachments, and case. Intended Use: The drop-spring-bow compass is intended to be used to draw small circles in ... -
ADS-62-SP
Abstract: This standard establishes design and documentation requirements which shall be completed prior to issue of a Flight Release or Airworthiness Release (AWR) to conduct helicopter Flight Testing on Pilotage and Target ... -
ADS-39A-HDBK
Abstract: This Aeronautical Design Standard (ADS) specifies Source Approval and Engineering Test requirements for alternate sources of helicopter drive system assemblies and components. These requirements are necessary to insure ... -
MIL-T-3183
Abstract: This specification covers one type of trainer for use in the preliminary instruction of the United States Armed Forces in the use and maintenance of the 90-mm gun, M3. The trainer is designated Trainer, Gunnery, Tank, 90-MM, M15. -
MIL-P-13585
Abstract: This specification covers preservation, packaging, and packing of miscellaneous ferrous and non-ferrous metal products. -
MIL-PRF-63005E
Abstract: The specification prescribes the requirements for writing technical manuals (TMs) for preparation for shipment of Army aircraft by cargo aircraft, vessel, truck, and helicopter (aerial recovery). These requirements establish ...Subject(s) : Weight and balance , -
ADS-45-HDBK
Abstract: This handbook establishes guidelines for data and test procedures, that should be completed prior to the issuance of a Contractor Flight Release (CFR) or Airworthiness Release (AWR) to conduct flight testing of armament ...Subject(s) : Airworthiness Release , Armament , helicopter , Fire control , helicopter , Flight Release , Helicopter , Rotary Wing , Rotorcraft , Stores , helicopter , Weapon , helicopter , -
ADS-40A-SP
Abstract: This Standard Practice Aeronautical Design Standard specifies the flight performance data required to document the characteristics and capabilities of an air vehicle. It is the purpose of this standard to provide a clear ... -
A-A-50214
Abstract: This proposed Commercial Item Description draft, as prepared by the Mobility Equipment Research and Development Command, Fort Belvoir, VA 22060, has not been approved for promulgation and is subject to modification. DO NOT ... -
VV-G-632B
Abstract: This specification covers one grade of a lubricating grease intended primarily for the lubrication of machinery which is equipped with compression type grease cups (see 6.8). Intended Use: a. The ...Subject(s) : Compression-type grease cups , Equipment , Grease , Lubrication , Machinery , -
MIL-S-52333B
Abstract: This specification covers three sizes of filter element sleeves for diatomite-type filters. Intended Use: The filter element sleeves are intended for use in pressure diatomite-type filters of water purification ...