AWS D14.9/D14.9M

AWS - American Welding Society

Specification for the Welding of Hydraulic Cylinders - First Edition

Organization:

Year: 2013

Abstract: This specification provides requirements for the design and manufacture of welded joints of hydraulic cylinders. When specified in the purchasing documents, compliance with all the requirements shall be required. This specification does not apply to the manufacture of welded tubing used for hydraulic cylinders which is covered under ASTM and other recognized specifications. This specification does not specify load determination, design assumptions, safety factors, or calculation methods for non-weld related areas of the hydraulic cylinder.
The Manufacturer's adherence to this specification shall include responsibility for the following:
(1) welding, as defined in 1.1.1, in accordance with this specification;
(2) producing welds as designated on drawings by appropriate symbols and notes, with sufficient detail to show joint preparation compatible with applied processes;
(3) providing written welding procedure specifications (WPSs);
(4) recording and maintaining results of all welding procedure and welder performance qualification tests;
(5) controlling use of designated base metals and welding consumables;
(6) inspecting the welds to the requirements of this specification;
(7) having a welding quality program in place. The requirements of AWS B5.17, Specification for the Qualification of Welding Fabricators may be used as a guide in establishing this welding quality program. Accreditation of quality systems of welding fabricators may be obtained through the AWS Certified Welding Fabricator (CWF) or equivalent programs.

URI: http://yse.yabesh.ir/std;query=autho15137D83081DAC4261598F1EFDEC9FCD/handle/yse/76195

Collections :

AWS - American Welding Society

Show full item record

contributor author	AWS - American Welding Society
date accessioned	2017-09-04T16:12:55Z
date available	2017-09-04T16:12:55Z
date copyright	01/01/2013
date issued	2013
identifier other	SQDYBFAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;query=autho15137D83081DAC4261598F1EFDEC9FCD/handle/yse/76195
description abstract	This specification provides requirements for the design and manufacture of welded joints of hydraulic cylinders. When specified in the purchasing documents, compliance with all the requirements shall be required. This specification does not apply to the manufacture of welded tubing used for hydraulic cylinders which is covered under ASTM and other recognized specifications. This specification does not specify load determination, design assumptions, safety factors, or calculation methods for non-weld related areas of the hydraulic cylinder. The Manufacturer's adherence to this specification shall include responsibility for the following: (1) welding, as defined in 1.1.1, in accordance with this specification; (2) producing welds as designated on drawings by appropriate symbols and notes, with sufficient detail to show joint preparation compatible with applied processes; (3) providing written welding procedure specifications (WPSs); (4) recording and maintaining results of all welding procedure and welder performance qualification tests; (5) controlling use of designated base metals and welding consumables; (6) inspecting the welds to the requirements of this specification; (7) having a welding quality program in place. The requirements of AWS B5.17, Specification for the Qualification of Welding Fabricators may be used as a guide in establishing this welding quality program. Accreditation of quality systems of welding fabricators may be obtained through the AWS Certified Welding Fabricator (CWF) or equivalent programs.
language	English
title	AWS D14.9/D14.9M	num
title	Specification for the Welding of Hydraulic Cylinders - First Edition	en
type	standard
page	64
status	Active
tree	AWS - American Welding Society:;2013
contenttype	fulltext