Browsing ARMY - GL2 - U.S. Army Soldier Systems Center by Title

Now showing items 1-20 of 30

      • A-A-52197 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;1995
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This commercial item description describes two types of parachute packing weights for use as packing aids.
        The packing weights are intended for use by parachute riggers for holding canopy gores in position during the ...

      • A-A-52197 VALID NOTICE 1 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2002
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center

      • A-A-59143 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;1997
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This commercial item description covers a table for inspection of parachute canopies. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this ...

      • A-A-59143 VALID NOTICE 1 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2002
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center

      • MIL-DTL-43021F 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2003
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This specification covers one type and size load binder of 10,000 pound capacity. Intended Use: The load binder is designed for use as a tie-down tensioning device in rigging general cargo and equipment for ...
        Subject(s) : Air delivery , Rigging , Tensioning device ,

      • MIL-DTL-43342F 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2005
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This document covers requirements for miscellaneous cotton and nylon webbing assemblies used in rigging for airdrop operations. Intended Use: The webbing assemblies covered by this document consisting of ...
        Subject(s) : Adapters , Aerial delivery , Bridles , Rigging ,

      • MIL-DTL-43649D 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2005
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This specification covers the requirements for three cargo parachute assemblies and the separate components thereof. Intended Use: The 12-foot and 26-foot diameter parachutes are intended for use in air-dropping ...
        Subject(s) : Airdrop , Canopy , Deployment bag , Drogue , Pack , Static line ,

      • MIL-DTL-44033B 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;1995
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This specification covers one type of concentric multi-loop lines fabricated of webbing and intended for use in airdrop operations. Intended Use: The items are intended for use in the rigging, extraction and ...
        Subject(s) : Air delivery , Extraction , Parachute , Rigging ,

      • MIL-DTL-44033B VALID NOTICE 1 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2002
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center

      • MIL-DTL-44036A 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2003
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This specification covers the requirements for one type of load binding system in cargo aircraft. Intended Use: The cargo tiedown assembly is intended for securing general cargo and equipment for transport ...
        Subject(s) : Air delivery , Restraint , Secure ,

      • MIL-DTL-44076B 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2006
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This specification covers the requirement for one type of lowering line with or without an adapter web.Intended Use: Lowering line assemblies are used as the standard method of lowering all individual ...
        Subject(s) : Equipment loads , Parachutists ,

      • MIL-DTL-44475A 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;1996
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This specification covers one type of a fabric release assembly. Intended Use: The fabric release assembly is used by airborne personnel to release a container assembly during a parachute descent.
        Subject(s) : Airborne jump operations ,

      • MIL-DTL-44475A VALID NOTICE 1 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2002
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center

      • MIL-DTL-44476A 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;1996
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This document covers one type and size of a parachutist's reinforced jump container. The container is fabricated from nylon duck cloth and nylon webbing. Intended Use: The container assembly is used by ...
        Subject(s) : Air delivery , Carrier , Weapons case ,

      • MIL-DTL-44476A VALID NOTICE 1 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2002
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center

      • MIL-DTL-44477A 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;1996
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This document covers one type and size of a parachutist's individual equipment container. Intended Use: The container assembly is used by airborne personnel during parachute operations.
        Subject(s) : Air delivery , Carrier ,

      • MIL-DTL-44477A VALID NOTICE 1 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2002
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center

      • MIL-DTL-44484 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;1996
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This specification covers 1 type of Truss Assembly used with the Type V Airdrop Platform.
        The Trusses will be of the following sizes, and as specified (see 6.2). 
         Type I    - 12 Foot              ...
        Subject(s) : Airdrop System , Cargo loads , Modular assemblies , Parachute , Platform , Resupply ,

      • MIL-DTL-44484 VALID NOTICE 1 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2002
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center

      • MIL-DTL-7554G 

        Type: standard
        Source: ARMY - GL2 - U.S. Army Soldier Systems Center:;2003
        Organization : ARMY - GL2 - U.S. Army Soldier Systems Center
        Abstract: This specification covers a group of airdrop container kits required for use in the airdrop system. Intended Use: The container kits are intended for use in the airdrop of miscellaneous equipment and bulky ...
        Subject(s) : Air delivery , Equipment ,