Show simple item record

PROCUREMENT SPECIFICATION, METRIC FASTENERS, CRES 300 SERIES, EXTERNALLY THREADED, MJ THREAD, 500 MPa Ftu and 700 MPa Ftu - Rev 1

contributor authorAIA/NAS - Aerospace Industries Association of America Inc.
date accessioned2017-09-04T18:01:05Z
date available2017-09-04T18:01:05Z
date copyright03/31/2011
date issued2011
identifier otherFYIEFEAAAAAAAAAA.pdf
identifier urihttp://yse.yabesh.ir/std;query=autho1513AF679D40AC4/handle/yse/184118
description abstractThis specification defines the requirements for 500 and 700 MPa minimum tensile strength austenitic CRES externally threaded metric fasteners procured under part numbers listed on part standards which refer to this specification. Drawings may carry notes which modify the requirements of this specification. Receiving contractors may reject any lot which does not conform.
The specification includes mechanical property requirements for the following four classes of fasteners:
Type 1 - Hex Head
Type 2 - Pan Head
Type 3 - Socket Head
Type 4 - 100° Flush Head
Recommendations for improvements or corrections of this specification should be directed to the NASC representative of a using aerospace company or to the National Aerospace Standards Committee, Aerospace Industries Association, 1000 Wilson Boulevard, Suite 1700, Arlington, VA, 22209.
languageEnglish
titleAIA/NAS NA0271num
titlePROCUREMENT SPECIFICATION, METRIC FASTENERS, CRES 300 SERIES, EXTERNALLY THREADED, MJ THREAD, 500 MPa Ftu and 700 MPa Ftu - Rev 1en
typestandard
page10
statusActive
treeAIA/NAS - Aerospace Industries Association of America Inc.:;2011
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record