ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.: Recent submissions
Now showing items 161-180 of 2692
-
Energy Guideline for Historic Buildings
Abstract: This guideline applies to buildings that are listed as historic buildings or which are eligible to be so listed by applicable law in the jurisdiction where the building is located. This guideline applies to projects that ... -
Measurement, Testing, Adjusting, and Balancing of Building HVAC Systems
Abstract: The corrections listed in this errata sheet apply to ANSI/ASHRAE Standard 111-2008 (RA 2017). The first printing is identified on the outside back cover as “Product code: 86332 11/17 -
Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings
Abstract: The corrections listed in this errata sheet apply to ANSI/ASHRAE/USGBC/IES Standard 189.1- 2014. The first printing is identified on the outside back cover as “Product code: 86606 12/14”, the second printing as “Product ... -
Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
Abstract: The corrections listed in this errata sheet apply to ANSI/ASHRAE Standard 37-2009. The first printing of 37-2009 is identified as “Product Code: 86094 9/09” on the outside back cover and the second printing is identified ... -
Method of Testing for Rating of Multipurpose Heat Pumps for Residential Space Conditioning and Water Heating
Abstract: The corrections listed in this errata sheet apply to ANSI/ASHRAE Standard 206-2013 (RA 2017). The first printing is identified on the outside back cover as “Product code: 86636 6/17” and the second printing is identified ... -
Advanced Energy Design Guide for Small to Medium Office Buildings— Achieving Zero Energy
Abstract: This Guide was developed through a collaboration of ASHRAE, The American Institute of Architects (AIA), Illuminating Engineering Society (IES), U.S. Green Building Council (USGBC), and the U.S. Department of Energy (DOE). A ... -
BACnet - A Data Communication Protocol for Building Automation and Control Networks
Abstract: Carl Neilson, BACnet International, 61 Seagirt Road, East Sooke, BCV9Z 1A3, V9Z 1A3. This request for interpretation refers to the requirements presented in ANSI/ASHRAE Standard 135-2016, Clause 13.15.1.1.6, regarding the ... -
BACnet - A Data Communication Protocol for Building Automation and Control Networks
Abstract: Horst Hannappel, MBS GmbH, Roemerstrasse 15, Krefeld D-47809. This request for interpretation refers to the requirements presented in ANSI/ASHRAE Standard 135-2016, Figure 6-12, regarding router discovery. A BACnet router ... -
Ventilation of Health Care Facilities
Abstract: I have an application where an existing Sterilizer Equipment Room meets all requirements noted above. The room is negatively pressurized with 10 ACH of exhaust air all being exhausted directly to the outdoors. Make-up air ... -
Method of Testing Liquid Chillers
Abstract: Abstract This standard applies to liquid-chilling or liquid-heating packaged equipment using any type of compressor and using the following methods of heat rejection during the cooling cycle: a. Air cooled b. Evaporatively ... -
Methods of Testing Capacity of Refrigerant Solenoid Valves
Abstract: This standard is applicable to refrigerant solenoid valves in the following circumstances: a. As defined in Section 3, "Definitions" b. For either liquid or vapor refrigerant applications c. For use with refrigerants ... -
Method of Testing the Performance of Cool-Storage Systems
Abstract: This standard covers cool-storage systems composed of chillers, storage medium, storage device or vessel, heat sink equipment or heat sink systems, and other auxiliary equipment required to provide a complete and working ... -
District Cooling Guide - Second Edition
Abstract: PURPOSE AND SCOPE The purpose of this guide is to provide guidance for all major aspects of district cooling system (DCS) design. The guidance is organized to be of use to both the inexperienced designer of DCSs as well ... -
BACnet - A Data Communication Protocol for Building Automation and Control Networks
Abstract: Request from: Carl Neilson, BACnet International, 61 Seagirt Road, BC, V9Z 1A3. This request for interpretation refers to the requirements presented in ANSI/ASHRAE Standard 135-2016, Clause 12.56 and Tables 12.71 and ... -
BACnet - A Data Communication Protocol for Building Automation and Control Networks
Abstract: Salvatore Cataldi, BELIMO Automaton AG, Brunnenbachstrasse 8, Hinwil, Switzerland, CH-8004. This request for interpretation refers to the requirements presented in ANSI/ASHRAE Standard 135-2016, Clause K.1.12, regarding ... -
BACnet - A Data Communication Protocol for Building Automation and Control Networks
Abstract: Request from: Carl Neilson, BACnet International, 61 Seagirt Road, BC, V9Z 1A3. This request for interpretation refers to the requirements presented in ANSI/ASHRAE Standard 135-2016, Clauses 13.2.2.1 and 13.3, regarding ... -
Method of Test for Conformance to BACnet
Abstract: Carl Neilson, BACnet International, 61 Seagirt Road, BC, V9Z 1A3. This request for interpretation refers to the requirements presented in ANSI/ASHRAE Standard 135.1-2013, Clause 4.5.7, regarding EPICS segmentation ability ... -
Methods for Performance Testing Positive Displacement Refrigerant Compressors and Condensing Units that Operate at Subcritical Pressures of the Refrigerant
Abstract: Consensus is defined by the American National Standards Institute (ANSI), of which ASHRAE is a member and which has approved this Standard as an ANS, as “substantial agreement reached by directly and materially affected ... -
Ventilation of Health Care Facilities
Abstract: Request from: Dan Hertzson, Turner Engineering, 1 Woodbury Blvd., Rochester, NY 14604. This request for interpretation refers to the requirements in ANSI/ASHRAE/ASHE Standard 170-2013, Section 6.4 and Table 6.4, regarding ... -
Method of Test for Determining Energy Performance and Water-Use Efficiency of Add-On Evaporative Precoolers for Unitary Air-Conditioning Equipment
Abstract: This standard applies to add-on evaporative precooling accessories applied to the condenser inlet air of air-cooled unitary direct-expansion cooling equipment with less than or equal to 240,000 Btu/h (70 kW) cooling capacity