درباره ما
ECIA - Electronic Components Industry Association: Recent submissions
Now showing items 401-420 of 507
-
ECA 710
Abstract: This requirements document is applicable to all types of single or multicontact electrical connectors including: circular, rectangular printed circuit, rectangular micro-miniature, rectangular D-subminiature, rectangular ... -
ECA 377
Abstract: This standard covers the general requirements for direct current (D.C.) metalized electrode, film and/or paper dielectric fixed capacitors in metallic and non-metallic cases. Capacitors listed in this standard are used ... -
ECA EIA-364-32F
Abstract: This test is conducted for the purpose of determining the resistance of a given electrical connector or socket to exposure at extremes of high and low temperatures and to the shock of alternate exposures to these extremes, ... -
ECA 498BA00
Abstract: The (applicable modifiers to described subfamily of keyboards) keyboards of certified quality covered by this detail specification.
1. have maximum enclosure dimensions of (maximum length, width, and height dimensions). ... -
ECA EIA/ECA-703-A
Abstract: Description
This specification defines the qualification program for resistors. The qualification program is defined in table1. Specification sheets can be added, as required, to define specific products or ... -
ECA EIA-364-78B
Abstract: This standard establishes a technique for evaluating the sealing integrity of the contact cavity walls of an environmentally sealed electrical connector by detecting leakage between a given contact cavity and those adjacent ... -
ECA 186-8E
Abstract: PURPOSE
This sinusoidal high frequency vibration test is performed for the purpose of determining the effect on component parts of vibration in the frequency range of 10 to 500 Hz or 10 to 2000 Hz as ... -
ECA EIA-540GAAA
Abstract: The Burn-In Sockets of assessed quality covered by this Detail Specification shall have:
a) Maximum enclosure dimensions that include insertion cover and actuator hardware as illustrated in Figure 1.
b) A working ... -
ECA RS-174
Abstract: This standard covers iron core transformers for use in Electronic Equipment in which long life, reliability and continuity of operation are essential, and which are required to transform voltages with fidelity over a ... -
ECA 452
Abstract: This Standard describes requirements for a fixed film type resistor distinguished, in general, by its high resistance value and its ability to operate at high voltage levels. This Standard is intended as a guide for ... -
ECA IS-757
Abstract: This document covers the general industry inspection requirements for molded surface mount tantalum capacitors with solid electrolyte. The devices selected for inspection shall be examined under 3 power to 10 power ... -
ECA IS-753
Abstract: This specification provides the engineering and performance requirements for a family of high density blade-and-tuning fork contact printed wiring board (PWB) connectors of assessed quality designed for use in electronic ...