Standard Specification for Blended Hydraulic Cement
AASHTO M 240M/M 240
Year: 2020
Abstract: This specification pertains to blended hydraulic cements for both general and special applications using slag, pozzolan, limestone, or some combination thereof, with portland cement or portland cement clinker, or slag with lime (see Note 1).
Note 1—This specification prescribes ingredients and proportions with some performance requirements, whereas ASTM C1157/C1157M is a hydraulic cement specification in which performance criteria alone govern the products and their acceptance.
The values stated in either SI units or inch-pound units are to be regarded separately as standard.
The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other.
Combining values from the two systems may result in nonconformance with the standard.
Values in SI units [or inch-pound units] shall be obtained by measurement in SI units [or inch-pound units] or by appropriate conversion, using the Rules for Conversion and Rounding given in IEEE/ASTM SI 10, of measurements made in other units [or SI units].
Values are stated in only SI units when inch-pound units are not used in practice.
The text of this standard refers to notes and footnotes that provide explanatory material.
These notes and footnotes (excluding those in tables and figures) are not requirements of the standard
-
Statistics
Standard Specification for Blended Hydraulic Cement
Show full item record
contributor author | AASHTO - American Association of State Highway and Transportation Officials | |
date accessioned | 2020-09-04T09:08:26Z | |
date available | 2020-09-04T09:08:26Z | |
date copyright | 2020 | |
date issued | 2020 | |
identifier other | QMLRMGAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std;jsessionid=F237659669B749A9242EBE4D2DFC361F/handle/yse/281381 | |
description abstract | This specification pertains to blended hydraulic cements for both general and special applications using slag, pozzolan, limestone, or some combination thereof, with portland cement or portland cement clinker, or slag with lime (see Note 1). Note 1—This specification prescribes ingredients and proportions with some performance requirements, whereas ASTM C1157/C1157M is a hydraulic cement specification in which performance criteria alone govern the products and their acceptance. The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. Values in SI units [or inch-pound units] shall be obtained by measurement in SI units [or inch-pound units] or by appropriate conversion, using the Rules for Conversion and Rounding given in IEEE/ASTM SI 10, of measurements made in other units [or SI units]. Values are stated in only SI units when inch-pound units are not used in practice. The text of this standard refers to notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) are not requirements of the standard | |
language | English | |
title | Standard Specification for Blended Hydraulic Cement | en |
title | AASHTO M 240M/M 240 | num |
type | standard | |
page | 16 | |
status | Active | |
tree | AASHTO - American Association of State Highway and Transportation Officials:;2020 | |
contenttype | fulltext |