Now showing items 321-340 of 636

    • ACI 523.3R 

      Type: standard
      Source: ACI - American Concrete Institute:;2014
      Organization : ACI - American Concrete Institute
    • ACI 232.3R 

      Type: standard
      Source: ACI - American Concrete Institute:;2014
      Organization : ACI - American Concrete Institute
      Abstract: Introduction
      High-volume fly ash (HVFA) concrete is a sustainable construction material when proportioned properly and used in appropriate construction applications. This report summarizes published ...
    • ACI 350 

      Type: standard
      Source: ACI - American Concrete Institute:;2006
      Organization : ACI - American Concrete Institute
      Abstract: INTRODUCTION
      The code and commentary includes excerpts from ACI 318-02 that are pertinent to ACI 350. The commentary discusses some of the considerations of Committee ACI 350 in developing "Code ...
    • ACI SP-157 

      Type: standard
      Source: ACI - American Concrete Institute:;1995
      Organization : ACI - American Concrete Institute
    • ACI 351.1R 

      Type: standard
      Source: ACI - American Concrete Institute:;2012
      Organization : ACI - American Concrete Institute
      Abstract: This report provides an overview of current practices for grouting to support equipment and machinery. Recommendations are provided for those portions of the grouting operation where a consensus could be developed among ...
      Subject(s) : bleeding , cementitious-based grout , consistency tests , curing , durability , epoxy grout , equipment grout , formwork (construction) , foundations , grout , hydraulic cement grout , inspection , machinery grout , mixing , placing , sand-cement grout , stiffness , strength , tests , volume change ,
    • ACI SP-238 

      Type: standard
      Source: ACI - American Concrete Institute:;2006
      Organization : ACI - American Concrete Institute
    • ACI 503.2-503.4 

      Type: standard
      Source: ACI - American Concrete Institute:;2014
      Organization : ACI - American Concrete Institute
      Abstract: This reference specification covers the production of a skid-resistant surface on hardened concrete by the application of epoxy and aggregate.
      The provisions of this reference specification shall govern unless otherwise ...
    • ACI SP-119 

      Type: standard
      Source: ACI - American Concrete Institute:;1989
      Organization : ACI - American Concrete Institute
      Abstract: PREFACE
      In May, 1978, the Canada Centre for Mineral and Energy Technology (CANMET), in association with the American Concrete Institute, the ACI Eastern Ontario and Quebec Chapter, and the Structural ...
    • ACI 440.7R 

      Type: standard
      Source: ACI - American Concrete Institute:;2010
      Organization : ACI - American Concrete Institute
      Abstract: This guideline provides information on the selection and design of FRP systems limited to externally bonded FRP laminates and near-surface-mounted FRP bars/strips for increasing the in-plane and out-of-plane strength of ...
      Subject(s) : buildings , cracking , cyclic loading , detailing , earthquake resistance , fiber-reinforced polymers , fibers , flexure , masonry , shear , structural analysis , structural design , unreinforced ,
    • ACI 209.2R ERTA 

      Type: standard
      Source: ACI - American Concrete Institute:;2008
      Organization : ACI - American Concrete Institute
    • ACI 364.8T 

      Type: standard
      Source: ACI - American Concrete Institute:;2011
      Organization : ACI - American Concrete Institute
      Abstract: Summary
      During concrete removal around reinforcement, including unbonded post-tensioned systems, potential collateral damage to the repaired structure must be considered relative to future performance. ...
      Subject(s) : demolition , hydrodemolition , post-tensioning , repair ,
    • ACI 522.1M 

      Type: standard
      Source: ACI - American Concrete Institute:;2013
      Organization : ACI - American Concrete Institute
      Abstract: This Specification provides requirements for the construction of pervious concrete pavement. 
      If the requirements of this Specification conflict with the Contract Documents, the Contract Documents shall govern.  ...
    • ACI 349.2R ERTA 

      Type: standard
      Source: ACI - American Concrete Institute:;2007
      Organization : ACI - American Concrete Institute
      Abstract: This report has been prepared by members of the ACI 349 Sub-committee on Steel Embedments to provide examples of the application of the ACI 349 Code to the design of steel embedments. The ACI 349 Committee was charged in ...
    • ACI SP-186 

      Type: standard
      Source: ACI - American Concrete Institute:;1999
      Organization : ACI - American Concrete Institute
    • ACI 224R 

      Type: standard
      Source: ACI - American Concrete Institute:;2001
      Organization : ACI - American Concrete Institute
      Abstract: Cracks in concrete structures can indicate major structural problems and detract from the appearance of monolithic construction. There are many specific causes of cracking. This report presents the principal causes of ...
      Subject(s) : aggregates , anchorage (structural) , bridge decks , cement-aggregate reactions , concrete construction , concrete pavements , concrete slabs , cooling , corrosion , crack propagation , crack width and spacing , cracking (fracturing) , drying shrinkage , heat of hydration , mass concrete , microcracking , polymer-modified concrete , prestressed concrete , reinforced concrete , restraint , shrinkage , shrinkage-compensating concrete , temperature , tensile stresses , thermal expansion , volume change ,
    • ACI SP-197 

      Type: standard
      Source: ACI - American Concrete Institute:;2002
      Organization : ACI - American Concrete Institute
    • ACI 349M ERTA 

      Type: standard
      Source: ACI - American Concrete Institute:;2011
      Organization : ACI - American Concrete Institute
    • ACI 549.2R 

      Type: standard
      Source: ACI - American Concrete Institute:;2004
      Organization : ACI - American Concrete Institute
    • ACI 351.5 

      Type: standard
      Source: ACI - American Concrete Institute:;2015
      Organization : ACI - American Concrete Institute
      Abstract: This specification covers requirements for installation of epoxy grout between foundations and bases of equipment and machinery. Included are requirements for materials, placement, and quality control.
      This specification ...
    • ACI 124.2R 

      Type: standard
      Source: ACI - American Concrete Institute:;1999
      Organization : ACI - American Concrete Institute
      Abstract: INTRODUCTION
      Henry Chapman Mercer (1856-1930) received considerable fame for his achievements in the fields of archaeology, anthropology, ceramics, and historical research, Mercer was a multi-talented ...
      Subject(s) : aesthetics , archaeology , cast-in-place concrete , columns , Fonthill , Henry C , history , Mercer , Mercer Mile , Mercer Museum , Moravian Pottery , reinforced concrete , roofs , tile works , vaults , walls , window mullions ,